JordE Posted January 15, 2012 Report Share Posted January 15, 2012 Hey Guys, I know these questions have probably been asked/answered a hundred times or more but wanted to get some insight for a little project i want to undertake... i have a 2009 Edge limited with the Audiophile audio(factory sub/speakers etc)...I want to add a Fosgate T500-1bdcp 500w mono amp to drive a Fosgate T0D412 12inch 500w sub...the sub is loaded in a Sound Ordnance Ported single 12" subwoofer enclosure........ i'm by no means an expert but i consider myself a bit handy and i'm considering doing the work myself...i'm gonna wire in an AudioControl Lc2i to get a proper output signal to the amp.... looking for some advice on where to mount the amp....(on the side of the sub box/under the seat/on the back of the back seats)...also some advice on running the 4gauge power wire through the firewall... i'm also gonna add a switch to the remote wire.......wife wont need the extra boooom from the amp/sub so the factory sub will be enough for her.... thanks for the advice/info Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.