superman1996ta Posted October 15, 2011 Report Share Posted October 15, 2011 (edited) Hello, I have a 2011 Ford Edge and I recently purchased a 200 series plug and play factory remote start, BB5Z-19G364-C. This may sound dumb but I can not figure out where to plug it in to. Does anyone know where to plug it in to? Or do you have the installation instrucitons? I have contacted the dealer and they are being less than helpful about giving me the instructions to install it. It looks like the one for the f150 that plugs into the TPMS modual, the one in the video on another post here but I have looked under both sides of the dash and I do not see the a modual that looks like the one in the video or any where else to plug it in to. I have also searched this and other sites and can not find where people plugged it in, just that they did it in 30 minutes or less. Any help would be greatly appreciated. Thanks, Chris Edited October 16, 2011 by superman1996ta Quote Link to comment Share on other sites More sharing options...
j3st3r Posted October 16, 2011 Report Share Posted October 16, 2011 Hello, I have a 2011 Ford Edge and I recently purchased a 200 series plug and play factory remote start, BB5Z-19G364-C. This may sound dumb but I can not figure out where to plug it in to. Does anyone know where to plug it in to? Or do you have the installation instrucitons? I have contacted the dealer and they are being less than helpful about giving me the instructions to install it. It looks like the one for the f150 that plugs into the TPMS modual, the one in the video on another post here but I have looked under both sides of the dash and I do not see the a modual that looks like the one in the video or any where else to plug it in to. I have also searched this and other sites and can not find where people plugged it in, just that they did it in 30 minutes or less. Any help would be greatly appreciated. Thanks, Chris I have the EXACT same question, today I searched both the under the drivers side and passenger side dash and can not find any place where the following 2 plugs from the remote start, plug into the vehicle. Quote Link to comment Share on other sites More sharing options...
Edge_Beast Posted October 23, 2011 Report Share Posted October 23, 2011 (edited) The harness plugs are found on the rear driver side panel in the cargo area. You must remove the plastic cover to get a hold of the plugs. I have instructions for the 100 bi-directional series if your interested....should be the same install I believe. Edited October 23, 2011 by Edge_Beast Quote Link to comment Share on other sites More sharing options...
j3st3r Posted October 23, 2011 Report Share Posted October 23, 2011 I just finished the install of the 200 series and took pictures of the whole process. I will post a complete DIY later today. Quote Link to comment Share on other sites More sharing options...
tenstepn Posted October 30, 2011 Report Share Posted October 30, 2011 I just finished the install of the 200 series and took pictures of the whole process. I will post a complete DIY later today. Did you ever compile your step by step guide? I was going to purchase my remote start this week, but have been on the fence about doing it myself or paying the dealer. Thanks! Brian Quote Link to comment Share on other sites More sharing options...
j3st3r Posted October 30, 2011 Report Share Posted October 30, 2011 Did you ever compile your step by step guide? I was going to purchase my remote start this week, but have been on the fence about doing it myself or paying the dealer. Thanks! Brian Sorry about the delay, I have all the pictures uploaded, and will do the step by step today. Don't hesitate, its definitely something you can do yourself. Quote Link to comment Share on other sites More sharing options...
Jasgal Posted October 31, 2011 Report Share Posted October 31, 2011 Do you have to take it to a dealer now to have them activate it? Quote Link to comment Share on other sites More sharing options...
j3st3r Posted October 31, 2011 Report Share Posted October 31, 2011 (edited) Do you have to take it to a dealer now to have them activate it? Yes, and I just posted the DIY here Edited October 31, 2011 by j3st3r Quote Link to comment Share on other sites More sharing options...
j3st3r Posted November 12, 2011 Report Share Posted November 12, 2011 Finished the DIY and posted videos here Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.