Jump to content

Stock Door Speakers


Recommended Posts

I replaced all 4 of the stock door speakers with Polk DXi570s. The OEM speakers have un-treated paper cones with foam surround and a whizzer cone (~$10.00 from a speaker supply house). They are graciously marked as 25W. The Polks dramatically improved the sound (especially the harsh upper-mids from the whizzer cone - typical of this design with no crossover). Next steps will be to add a sub with an amp and perhaps a 4-channel amp for the door speakers and then maybe a re-eq. Special thanks to Paul's Ford Edge Door Panel Speaker Replacement Guide - nicely done. 2010 Ford SEL Edge with 6 CD changer. If anyone wants these stock speaker, you can have them for the shipping cost.

post-15428-0-88729000-1304775043_thumb.jpg

post-15428-0-23441600-1304775058_thumb.jpg

Link to comment
Share on other sites

Linty, can we assume that the Polks were a absolute drop in replacement? That is, you just unbolt the existing paper cones, and re-bolt the new Polks?

 

I'm putting a AVH-P3300BT in my dash next week, considering doing the door speaker upgrade as well, while I've got things apart.

Link to comment
Share on other sites

Linty, can we assume that the Polks were a absolute drop in replacement? That is, you just unbolt the existing paper cones, and re-bolt the new Polks?

 

I'm putting a AVH-P3300BT in my dash next week, considering doing the door speaker upgrade as well, while I've got things apart.

 

Hunter306 - yes, the Polks are a drop-in fit - I did have a bit a trouble lining up the 4th screw & hole - I suggest loosely fitting all four screws in before fully tightening them - I used a small screwdriver to help line up the holes in the speaker frame with the mounting holes in the door. Also note; the Ford connector doesn't fit the Polks - you can purchase an adapter (~$15), or cut the connector off and add crimp terminals. The keyed side of the Ford connector is the positive side (I believe the positive wires are solid color - not sure if this is universal).

 

Let me know how the head unit install goes

 

thanks Linty

Link to comment
Share on other sites

  • 2 weeks later...

Hunter306 - yes, the Polks are a drop-in fit - I did have a bit a trouble lining up the 4th screw & hole - I suggest loosely fitting all four screws in before fully tightening them - I used a small screwdriver to help line up the holes in the speaker frame with the mounting holes in the door. Also note; the Ford connector doesn't fit the Polks - you can purchase an adapter (~$15), or cut the connector off and add crimp terminals. The keyed side of the Ford connector is the positive side (I believe the positive wires are solid color - not sure if this is universal).

 

Let me know how the head unit install goes

 

thanks Linty

Hey Linty where can you purchase these adapters?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...