45auto Posted February 17, 2010 Report Share Posted February 17, 2010 Access???? Inner fender well liner need to be removed? Or is there a better/easier way to access. Thanks Quote Link to comment Share on other sites More sharing options...
k_m Posted February 17, 2010 Report Share Posted February 17, 2010 From under the vehicle : 1. Remove the 2 screws and position the fender splash shield aside. 2. Release the tabs and remove the fog lamp bezel. 3. Release the locking tabs and remove the fog lamp. 4. Disconnect the electrical connector. 5. You should be able to remove the Fog light now Hope this helps Quote Link to comment Share on other sites More sharing options...
45auto Posted February 17, 2010 Author Report Share Posted February 17, 2010 Two screws from where? There are many screws under there. Looks like all the screws at the front half portion of wheel well needs to be removed and pulled back, down, or at an angle, away from the inner well. Quote Link to comment Share on other sites More sharing options...
k_m Posted February 17, 2010 Report Share Posted February 17, 2010 (edited) Two screws from where? There are many screws under there. Looks like all the screws at the front half portion of wheel well needs to be removed and pulled back, down, or at an angle, away from the inner well. The 2 screws are from the ---> Fender Splash Shield. See the attached photo. [basically the shield inside of the tire well] NOTE: You do not have to remove all 8 screws to the Fender Splash Shield. Just the 2 closest to the bumper in the diagram its labeled #1 that way you can have access to the fog lamp. However, theres nothing wrong with removing all 8 screws from the splash shield in order to have more access/convenient Edited February 17, 2010 by k_m Quote Link to comment Share on other sites More sharing options...
Lex Talionis Posted February 17, 2010 Report Share Posted February 17, 2010 yep, remove a few of the offending fender well screws local to just the bulb being changed, peel back the cover and then have small hands as it is brutal to get up in there, and very awkward placement and other plastic pieces in the way when you do get up in there. replacing those bulbs is like a 30 minute job. read up on some of the fog light threads about it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.