scootertoo21 Posted September 4, 2009 Report Share Posted September 4, 2009 Just got it. (in fact within 24 hours of ordering it!!)Installed it. Very easy. I love the looks and the way it fits the curve of the back bumper. The lip of the protector appears to be rounded where the Edge bumper has an angled lip. No problem for me! Thank you, igcitng, for your efforts in searching and then reporting back to us! It fills my needs very well. cdbirch, Would you mind snapping a closeup pic of the left and right sides? Sorry, I'm a perfectionist. So shoot me. Quote Link to comment Share on other sites More sharing options...
igcitng Posted September 4, 2009 Author Report Share Posted September 4, 2009 Bang! Quote Link to comment Share on other sites More sharing options...
cdbirch Posted September 4, 2009 Report Share Posted September 4, 2009 Here is a picture...it was hard to get the sun at the correct angle to see it. Focus was difficult because the sun was so bright...very unusual for Western Pennsylvania! igcitng, I almost walked past my own car today noticing how nice the bumper protector looked. Chuck Quote Link to comment Share on other sites More sharing options...
igcitng Posted September 4, 2009 Author Report Share Posted September 4, 2009 LOL! You think your Edge is all that now, huh? That is a great pic. I will grab one of mine and post this evening. Looks about the same. As you can see, to even see it you have to be on one side and get down and look it in the eye, and in the sun. To me better than the ding I had, and what else may have happened. I use mine to move a lot of stuff around, so lots of potential. Be back in a bit with a pic. Here is a picture...it was hard to get the sun at the correct angle to see it.Focus was difficult because the sun was so bright...very unusual for Western Pennsylvania! igcitng, I almost walked past my own car today noticing how nice the bumper protector looked. Chuck Quote Link to comment Share on other sites More sharing options...
igcitng Posted September 4, 2009 Author Report Share Posted September 4, 2009 Closeup pic. Quote Link to comment Share on other sites More sharing options...
cdbirch Posted September 5, 2009 Report Share Posted September 5, 2009 Your picture also shows how well it fits the curve of the hatch. Nice find. Again, thanks!! Chuck Quote Link to comment Share on other sites More sharing options...
scootertoo21 Posted September 5, 2009 Report Share Posted September 5, 2009 Thanks to both of you for taking the time. Those are great pictures! Quote Link to comment Share on other sites More sharing options...
DevilBuckeye Posted September 29, 2009 Report Share Posted September 29, 2009 Linky Found em for $45 incase anyone is still looking for em. Gonna get mine next week. Quote Link to comment Share on other sites More sharing options...
feelin edgy Posted September 29, 2009 Report Share Posted September 29, 2009 I just ordered mine. Thanks for the tip. Quote Link to comment Share on other sites More sharing options...
garyedwardsmith Posted September 30, 2009 Report Share Posted September 30, 2009 Linky Found em for $45 incase anyone is still looking for em. Gonna get mine next week. Thanks for the link. The other supplier wouldn't ship to Canada. This one does so I ordered one. Quote Link to comment Share on other sites More sharing options...
anglwngss Posted September 30, 2009 Report Share Posted September 30, 2009 Are there any differences in the 08 and 09 Edges? I've got a 09, and would like to get this as well! Quote Link to comment Share on other sites More sharing options...
igcitng Posted September 30, 2009 Author Report Share Posted September 30, 2009 I think it will fit 2007-2010, but not positive about 2010. Quote Link to comment Share on other sites More sharing options...
Grey Posted September 30, 2009 Report Share Posted September 30, 2009 I'm wondering if it will fit the MKX????? :stats: Quote Link to comment Share on other sites More sharing options...
igcitng Posted September 30, 2009 Author Report Share Posted September 30, 2009 Aren't they the same body? It should. Quote Link to comment Share on other sites More sharing options...
Lex Talionis Posted September 30, 2009 Report Share Posted September 30, 2009 Aren't they the same body? It should. yeah, agreed. Quote Link to comment Share on other sites More sharing options...
bbf2530 Posted September 30, 2009 Report Share Posted September 30, 2009 (edited) I'm wondering if it will fit the MKX????? :stats: Hi Grey. :D Just to add a heads up: I do not know for sure and am not contradicting anyone. However, since no one is absolutely sure to this point, I would advise double-checking before ordering. While the steel body panels are similar (even exactly the same), the front and in this case rear fascias do differ. And the rear bumper shape may vary enough to make fit questionable. It may very well fit, but you may want to go to a Ford Dealer and park your MKX next to an Edge and compare bumpers first, especially if the piece is non-refundable. Even if refundable, it may be less hassle to stop and compare bumpers than have to ship the piece back. Just a thought. Whatever you decide to do, good luck. :beerchug: Edited September 30, 2009 by bbf2530 Quote Link to comment Share on other sites More sharing options...
Grey Posted October 1, 2009 Report Share Posted October 1, 2009 Hi Grey. :D Just to add a heads up: I do not know for sure and am not contradicting anyone. However, since no one is absolutely sure to this point, I would advise double-checking before ordering. While the steel body panels are similar (even exactly the same), the front and in this case rear fascias do differ. And the rear bumper shape may vary enough to make fit questionable. It may very well fit, but you may want to go to a Ford Dealer and park your MKX next to an Edge and compare bumpers first, especially if the piece is non-refundable. Even if refundable, it may be less hassle to stop and compare bumpers than have to ship the piece back. Just a thought. Whatever you decide to do, good luck. :beerchug: Yep and I should know. I just traded in my Edge when we got the Fusion Hybrid. They sat next to each other for 2 years. I'll be making the trip to my dealer in a few days, so will compare them there. Something tells me they could easily be different since the license plate is in the MKX bumper skin and the back up sensors are up very high - just under the lip. Regardless, they sure look great on the Edge. Hope I can find something similar, it this doesn't look doable. Thanks Quote Link to comment Share on other sites More sharing options...
mccolganr Posted October 1, 2009 Report Share Posted October 1, 2009 Does anybody know where I can purchase this in Canada? Quote Link to comment Share on other sites More sharing options...
igcitng Posted October 1, 2009 Author Report Share Posted October 1, 2009 Does anybody know where I can purchase this in Canada? http://www.woodys-auto-supply.com/performa...prod=L22-114001 These people ship to Canada, and I also found one on Ebay in Canada. Or google the part name and number with Canada added and you may find some more. Quote Link to comment Share on other sites More sharing options...
mccolganr Posted October 1, 2009 Report Share Posted October 1, 2009 (edited) trdsparks.com The part number isn't the same on this link. Can anyone confirm that this is in fact the same product? Looks the same, the price is right and they ship to Canada..... Edited October 1, 2009 by mccolganr Quote Link to comment Share on other sites More sharing options...
igcitng Posted October 1, 2009 Author Report Share Posted October 1, 2009 That may be their part #. I would confirm that it is a Bushwacker brand and their part number. This cover is also made for the xD and some other little tiny toyota hatchback. It looks the same, but the size is important, and the xB is the bigger of the Toyotas it is made for. Quote Link to comment Share on other sites More sharing options...
feelin edgy Posted October 6, 2009 Report Share Posted October 6, 2009 (edited) I got my bumper protector Friday from trdsparks. I installed it, and five hours later left for a 1200 mile weekend roadtrip. The install could not have been easier. The whole thing including a good wash down of the bumper didn't take 5 minutes. The fit is great. I will take some pics when I get a chance. BTW, it looks the same as the bushwhacker in the original post, so I think the part number problem noted above is a non-issue. Edited October 6, 2009 by feelin edgy Quote Link to comment Share on other sites More sharing options...
flyerjmr33 Posted October 7, 2009 Report Share Posted October 7, 2009 Neither of those, sorry. Think outside the box. OK-- How about one made for the Edge? http://fparts.dealerfit.com/store/shopping...6d5ab47d00e9b63 Quote Link to comment Share on other sites More sharing options...
pxb006 Posted October 7, 2009 Report Share Posted October 7, 2009 OK-- How about one made for the Edge? http://fparts.dealerfit.com/store/shopping...6d5ab47d00e9b63 I think you need to go back and read the original post. Some folks don't like the Ford protector because it doesn't protect the edge of the bumper. I have the Ford version and am happy with it, but if I didn't have it already, I would probably have gone with the one for the Scion. Quote Link to comment Share on other sites More sharing options...
feelin edgy Posted October 7, 2009 Report Share Posted October 7, 2009 Additionally, this is the description of the bumper protector available from ford. "Affix this scuff-resistant vinyl appliqué to the top of your vehicle’s rear bumper in order to help protect the upper surface from paint damage that can occur during the loading and unloading of cargo." I wanted something a little more substantial than a "scuff resistant vinyl applique". The part from Bushwhacker is very substantial. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.