Jump to content

Lower door moulding


Recommended Posts

Regarding my 2020 Ford Edge.

Local automatic car wash pulled my color keyed left back door lower molding off. Part appears undamaged. When I pop it back in place it doesn’t seem to hold tight. Are there clips for this piece?

Or an adhesive required.

Has several flat pins along center of molding plus several smaller pins along upper edge of molding. These fit into a black plastic part that remained on the door.

  • Like 1
  • Sad 1
Link to comment
Share on other sites

Welcome to the Forum @Kellmac!

 

The 2020 Edge Workshop Manual indicates the Rear Door Moulding panel is retained to the body by eleven (11) clips attached to the panel's molded-in pedestals.

 

You might try putting a square of masking tape or low-tack painter's tape on the outer face of the panel corresponding to each of the eleven pedestals, to ensure that you are directly engaging each and every retaining clip.

 

If any of your Edge's clips appear to be damaged when compared to the below photo, replacement clips are available per Ford's online parts-selling site, and through your local dealer's Parts Department.

 

And finally, the 2020 Edge Workshop Manual removal & installation procedure is attached below as a PDF document.

 

Good luck!

 

RearDoorMoulding-RetainerClipLocations-2020EdgeWorkshopManual.thumb.jpg.b2467ed076b5b510ab831ba46b3bb5da.jpg

 

 

RearDoorMoulding-RetainerClipLocations-FordParts_com.thumb.jpg.45af8e95bd3accb7dfc66bb039cf455e.jpg

 

 

RearDoorMoulding-RetainerClipsCLOSEUP-W716352S300-FordParts_com.jpg.c1739b07de7a0dd79a757665a7de0aa0.jpg

 

 

Link to this FordParts webpage

RearDoorMoulding-RetainerClips-W716352S300-FordParts_com.thumb.jpg.0e929aca34c6fce56e39cad34fc46a74.jpg

 

 

 

Rear Door Moulding - Removal and Installation - 2020 Edge Workshop Manual.pdf

  • Like 3
  • Thanks 2
Link to comment
Share on other sites

On 3/12/2025 at 3:25 PM, johnmarkp said:

I am pretty sure I got the Advanced Auto version of these.  I ended up having to shave a milometer of plastic off the ends of the two engagement thingies.  (not sure what they called)

YMMV

Think "engagement thingies" is the correct name. 

  • Like 1
Link to comment
Share on other sites

Hey all, I'm super heartbroken that one of the lower door molding trims fell off my door and the local Ford Dealerships body shop repair cost is about $650 and I just can't even do that because I've been unemployed for 1.5 year from a hit and run on my scooter near my home and still waiting for disability for my unusable rebuilt left arm. Anyways, I've spent hours looking for it aftermarket and I can worry about the paint later.

 

2019 Ford Edge ST. Driver door lower, trim molding(?)

 

Am I so unfortunate I need to replace the entire lower door molding trim (black side skirt included) as the body shop said? Does anyone have any advice on potentially finding the part? I feel like I've found grey ones on eBay but incredibly hard to tell. 

 

Thanks all!

b0151be6-3747-4c2d-8a5b-5751753a6981.jpg

  • Like 1
Link to comment
Share on other sites

Dealers will always be expensive. The part number is ft4z5820879dc and itself is much cheaper. See here for example an OEM part.  But the part will require painting to match your color. 

 

Also, searching the part number on eBay you will find even cheaper and cheaper still used. If your lucky, you might find one with same color saving you from having to paint it. 

  • Thanks 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...