Kellmac Posted Sunday at 09:35 PM Report Share Posted Sunday at 09:35 PM Regarding my 2020 Ford Edge. Local automatic car wash pulled my color keyed left back door lower molding off. Part appears undamaged. When I pop it back in place it doesn’t seem to hold tight. Are there clips for this piece? Or an adhesive required. Has several flat pins along center of molding plus several smaller pins along upper edge of molding. These fit into a black plastic part that remained on the door. 2 Quote Link to comment Share on other sites More sharing options...
Haz Posted Monday at 05:20 PM Report Share Posted Monday at 05:20 PM Welcome to the Forum @Kellmac! The 2020 Edge Workshop Manual indicates the Rear Door Moulding panel is retained to the body by eleven (11) clips attached to the panel's molded-in pedestals. You might try putting a square of masking tape or low-tack painter's tape on the outer face of the panel corresponding to each of the eleven pedestals, to ensure that you are directly engaging each and every retaining clip. If any of your Edge's clips appear to be damaged when compared to the below photo, replacement clips are available per Ford's online parts-selling site, and through your local dealer's Parts Department. And finally, the 2020 Edge Workshop Manual removal & installation procedure is attached below as a PDF document. Good luck! Link to this FordParts webpage Rear Door Moulding - Removal and Installation - 2020 Edge Workshop Manual.pdf 2 2 Quote Link to comment Share on other sites More sharing options...
enigma-2 Posted 1 hour ago Report Share Posted 1 hour ago Possibility that when the car wash ripped the part off, one or more of those clips were lost. Think that I seen them *or something like them) at Advanced Auto. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.