Jump to content

2008 Edge Limited - Changing dash display from metric to imperial


RobynL_328

Recommended Posts

Hi,

So I let my boyfriend borrow my Edge for a couple of days and when I got it back, the temperature display was in Celsius and my dash display by the steering wheel had everything in kilometers. He said he has no idea how he did this! Figures. Does anyone know how I can switch it back? I can't find instructions specific to the 2008 edge limited. 

Thank you in advance!

Robyn

Link to comment
Share on other sites

Look below the instrument cluster.

 

There is a switch with three buttons. They are marked (left to right): "INFO", "SETUP" & "RESET."

 

This control allows you select, change and reset several functions which are shown in the INFO screen  at the bottom of the instrument cluster.

 

Press "SETUP".

 

This will allow you to make changes on the following areas;

 

System Check

Units (English/Metric)

Autolamp

Autolock

Autounlock

 

Apparently your boyfriend was pushing buttons to see what they did & forgot to set everything back to original. 

  • Thanks 1
Link to comment
Share on other sites

I have no buttons on or around the instrument cluster. And in the system check report, there are no other options to select after it reports the distance to empty. So neither instructions will work. Although I appreciate the copy of the owners manual, I will review it to see if there are alternate instructions that will help. In the meantime, if anyone has any other ideas, I would appreciate it.

  • Haha 1
Link to comment
Share on other sites

Recapping with photos:

 

2008 Edge Limited Instrument Cluster with Message Center digital screen...

 

InstrumentClusterPhoto-2008EdgeLimited.jpg.db7fab237cc198108e9f82b815d0df59.jpg

 

 

 

2008 Edge Limited Instrument Panel Center Stack with Message Center control buttons, orange-boxed in this photo...

 

Info-Setup-ResetButtonsinInstrumentPanelCenterStack-2008EdgeLimited.jpg.5c43787f4a7956f6c8ff1d70e1eb525a.jpg

 

 

 

Message Center Instructions on use of "Info" - "Setup" - "Reset" control buttons shown in the above photo...

 

MessageCenterInstructions-QuickReferenceGuide-2008EdgeLimited.jpg.940635f55ce2550e170efaec4c6cc89a.jpg

 

These instructions are contained in the 2008 Edge Quick Reference Guide, which is attached below as a PDF document...

 

Good luck!

2008 Edge Quick Reference Guide 1st Ed.pdf

  • Like 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...