Degrum7 Posted January 30 Report Share Posted January 30 So when I open the door, the lighting is different colors. But when I start they all change to what I have them set to. Is there a reset to get them all to light same color at same time? As I say, it’s only when I open door with engine off. 1 Quote Link to comment Share on other sites More sharing options...
Wubster100 Posted January 30 Report Share Posted January 30 Welcome to the forum @Degrum7. Are you able to control the ambient lighting from the settings on the touch screen? When a door is opened, it should be a safety feature for the open door to light up red. 1 Quote Link to comment Share on other sites More sharing options...
omar302 Posted January 30 Report Share Posted January 30 (edited) What color is it? If the door's ambient light is different and is red than it is normal. It is supposed to inform you that this door is open. Edit: just noticed this the 2011 sub forum. My comment applies to 2015+. Edited January 30 by omar302 1 Quote Link to comment Share on other sites More sharing options...
Haz Posted January 30 Report Share Posted January 30 (edited) From the 2011 Edge Workshop Manual, with emphasis added... Illuminated Entry The illuminated entry requests the dimmable backlighting, the parking lamps and the courtesy lamps to illuminate when the ignition is off and a door or liftgate is opened, the RKE transmitter UNLOCK button is pressed, or the vehicle is unlocked using the keyless entry keypad. If no doors are open, the illuminated entry requests the lamps off after 25 seconds have elapsed, the ignition switched out of off, the RKE transmitter LOCK button is pressed, or the vehicle is locked using the keyless entry keypad. Illuminated Exit The illuminated exit requests the dimmable backlighting, the parking lamps, and the courtesy lamps to illuminate for 25 seconds after all doors are closed and the ignition is turned off. The illuminated exit deactivates when the ignition transitions out of off, a door or liftgate becomes ajar, or 25 seconds have elapsed. Ambient Lighting The ambient lighting subsystem provides illumination to the center console cupholders, the storage bin, the door map pockets, the door pull handles, the door release handles, and the front and rear footwells for illuminated entry or when the ignition is in run with the parking lamps on. The ambient lighting is controlled using the touch screen display in the center of the instrument panel. When the illuminated entry feature is active, the ambient lighting defaults to a pre-set color and brightness setting. When all the doors are closed and the illuminated entry is no longer active, the ambient lighting returns to the last color and brightness setting that was set by the operator. The touch screen display is used to select one of 7 color combinations or turn the ambient lighting feature on or off. The ambient lighting system retains the last color setting and brightness between uses. For vehicles with memory seats, the ambient lighting color can also be set to correspond to the Driver 1 or Driver 2 settings. Good luck! Edited January 30 by Haz 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.