Mustang 11111 Posted Tuesday at 03:41 PM Report Share Posted Tuesday at 03:41 PM I have a 2013 ford edge sel with dual climate I have upgraded it from the sync 1 to sync 3 with all the parts from eBay and bought a harness from intelligentonetech and the buttons on the screen work with the climate but it just doesn’t display the current settings like the temperature it’s set at or the fan speed. Thank you very much! I am attaching a picture of the climate screen. 1 Quote Link to comment Share on other sites More sharing options...
Mustang 11111 Posted Saturday at 04:43 AM Author Report Share Posted Saturday at 04:43 AM Does any one have any ideas 1 Quote Link to comment Share on other sites More sharing options...
Wubster100 Posted Saturday at 03:31 PM Report Share Posted Saturday at 03:31 PM Welcome to the forum @Mustang 11111, Was the new SYNC system programed base on your VIN? Have you tried reaching out to seller? Quote Link to comment Share on other sites More sharing options...
Mustang 11111 Posted yesterday at 12:10 AM Author Report Share Posted yesterday at 12:10 AM I bought the sync 3 apim from eBay so I had to program it myself. I just got to figure out what codes are wrong . 1 Quote Link to comment Share on other sites More sharing options...
Wubster100 Posted 22 hours ago Report Share Posted 22 hours ago (edited) Can you post your AsBuilt data? Please upload it as a .ab file. Edited 22 hours ago by Wubster100 Quote Link to comment Share on other sites More sharing options...
Mustang 11111 Posted 7 hours ago Author Report Share Posted 7 hours ago I have it on my phone I don’t got access to it right now to plug in but i took a picture of it. 1 Quote Link to comment Share on other sites More sharing options...
Wubster100 Posted 5 hours ago Report Share Posted 5 hours ago It seems like there are some problems with the AsBuilt data. Are you located in North America or Europe? 7D0-01-01: xxxx-*xxx-xxxx 4=Aux Audio Only, C1MCA EU Climate Strategy, Chimes NA Strategy, Rotary Volume 0=Aux Audio Only, CGEA NA Climate Strategy, Chimes NA Strategy, Rotary Volume 7D0-01-01: xxxx-xxxx-*xxx E=ICAND On, Smart Auto Enabled, My Temp Available, Non RDS Market (NA) 0=ICAND Off, Smart Auto Disabled, My Temp Not Available, Non RDS Market (NA) 7D0-01-02: xxxx-xxxx-*xxx A=CGEA 1.3, Heated Windshield Disabled, Rear Climate Automatic 0=CGEA 1.2 or C1MCA, Heated Windshield Disabled, Rear Climate Manual w/o Air Flow Mode 8=CGEA 1.3, Heated Windshield Disabled, Rear Climate Manual w/o Air Flow Quote Link to comment Share on other sites More sharing options...
Mustang 11111 Posted 4 hours ago Author Report Share Posted 4 hours ago I’m in North America 1 Quote Link to comment Share on other sites More sharing options...
Wubster100 Posted 4 hours ago Report Share Posted 4 hours ago Some of your settings are set to the European region. Quote Link to comment Share on other sites More sharing options...
Mustang 11111 Posted 3 hours ago Author Report Share Posted 3 hours ago What would I need to change to fix this also do you see why the climate isn’t showing up? Thank you so much 1 Quote Link to comment Share on other sites More sharing options...
Wubster100 Posted 3 hours ago Report Share Posted 3 hours ago Try changing the values that I posted above. After you make the changes, reboot the APIM. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.