Mustang 11111 Posted January 28 Report Share Posted January 28 I have a 2013 ford edge sel with dual climate I have upgraded it from the sync 1 to sync 3 with all the parts from eBay and bought a harness from intelligentonetech and the buttons on the screen work with the climate but it just doesn’t display the current settings like the temperature it’s set at or the fan speed. Thank you very much! I am attaching a picture of the climate screen. 1 Quote Link to comment Share on other sites More sharing options...
Mustang 11111 Posted February 1 Author Report Share Posted February 1 Does any one have any ideas 1 Quote Link to comment Share on other sites More sharing options...
Wubster100 Posted February 1 Report Share Posted February 1 Welcome to the forum @Mustang 11111, Was the new SYNC system programed base on your VIN? Have you tried reaching out to seller? Quote Link to comment Share on other sites More sharing options...
Mustang 11111 Posted February 2 Author Report Share Posted February 2 I bought the sync 3 apim from eBay so I had to program it myself. I just got to figure out what codes are wrong . 1 Quote Link to comment Share on other sites More sharing options...
Wubster100 Posted February 2 Report Share Posted February 2 (edited) Can you post your AsBuilt data? Please upload it as a .ab file. Edited February 2 by Wubster100 Quote Link to comment Share on other sites More sharing options...
Mustang 11111 Posted February 2 Author Report Share Posted February 2 I have it on my phone I don’t got access to it right now to plug in but i took a picture of it. 1 Quote Link to comment Share on other sites More sharing options...
Wubster100 Posted February 2 Report Share Posted February 2 It seems like there are some problems with the AsBuilt data. Are you located in North America or Europe? 7D0-01-01: xxxx-*xxx-xxxx 4=Aux Audio Only, C1MCA EU Climate Strategy, Chimes NA Strategy, Rotary Volume 0=Aux Audio Only, CGEA NA Climate Strategy, Chimes NA Strategy, Rotary Volume 7D0-01-01: xxxx-xxxx-*xxx E=ICAND On, Smart Auto Enabled, My Temp Available, Non RDS Market (NA) 0=ICAND Off, Smart Auto Disabled, My Temp Not Available, Non RDS Market (NA) 7D0-01-02: xxxx-xxxx-*xxx A=CGEA 1.3, Heated Windshield Disabled, Rear Climate Automatic 0=CGEA 1.2 or C1MCA, Heated Windshield Disabled, Rear Climate Manual w/o Air Flow Mode 8=CGEA 1.3, Heated Windshield Disabled, Rear Climate Manual w/o Air Flow Quote Link to comment Share on other sites More sharing options...
Mustang 11111 Posted February 2 Author Report Share Posted February 2 I’m in North America 1 Quote Link to comment Share on other sites More sharing options...
Wubster100 Posted February 2 Report Share Posted February 2 Some of your settings are set to the European region. Quote Link to comment Share on other sites More sharing options...
Mustang 11111 Posted February 2 Author Report Share Posted February 2 What would I need to change to fix this also do you see why the climate isn’t showing up? Thank you so much 1 Quote Link to comment Share on other sites More sharing options...
Wubster100 Posted February 2 Report Share Posted February 2 Try changing the values that I posted above. After you make the changes, reboot the APIM. Quote Link to comment Share on other sites More sharing options...
Mustang 11111 Posted February 5 Author Report Share Posted February 5 My battery keeps dieing and I noticed that the light on the screen has a very dim backlight coming from it but does not turn off how do I fix it? 2 Quote Link to comment Share on other sites More sharing options...
Mustang 11111 Posted February 6 Author Report Share Posted February 6 This is on the radio screen could it be from the programing Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.