2013 ABS module/HCU Programming

[John 2013 Edge]

Hello. I have a 2013 Edge Limited AWD and I’m going to replace the ABS module due to the sticky bypass valve issue.

 

I understand I will need to program it, and that the traditional way to do that is with a VCM and Ford IDS. It would seem however that VCM units are all but unavailable.

 

I can find plenty of info that J2534 with FRDS will work for 2018+, and some info that J2534 with FJDS will communicate with the older units like mine, but no confirmation that I would be able to use J2534 to program the new ABS/HCU module.

 

I have the engine/trans assy out currently due to water pump and other maintenance, I figure I’ll change out the brake system items (hcu, booster) while I’m here.

 

Can someone point me to a scan tool I should buy to do this? Will FJDS and a unit such as the Mongoose Plus or the CarDAQ Plus-3 program my new unit?

 

Thanks

[John 2013 Edge]

Ok I’ve found this:

https://www.motorcraftservice.com/diagnostic/Support?channelId=46&categoryId=286
 

Which says that the FJDS should be able to program modules but it uses the terminology “SELECT” vehicles which makes me nervous. Would love to hear from someone who knows.

 

Thanks!

[John 2013 Edge]

And a final revelation; it looks like the “select” term applies to 2018+ models only.

 

So I guess my question is can I use FJDS to program my new 2013 ABS module?

 

Thanks

[Wubster100]

FJDS provides module reprogramming software that covers 1996 to select 2018 Ford, Lincoln and Mercury module reprogramming functions, plus complete dealership level diagnostic software for all 2018 to present Ford and Lincoln vehicles. FJDS is designed for use with J2534 compatible Vehicle Communications Interfaces (VCI) including Ford diagnostic hardware (VCM II, or VCMM). The FJDS software license includes time based access to the FJDS software, software updates and calibration files.

 

The following vehicles are supported by FDRS          
     2018+         Expediion/Navigator
     2018+         Ecosport
     2019+         Ranger
     2020+         Transit
     2019+         Transit Connect
     2020+         Explorer/Aviator
     2020+         Super Duty
     2020+         Escape/Corsair
     2021+         F-150
     2021+         Edge/Nautilus
     2021+         Mach-E
All other vehicles are supported by IDS/FJDS

 

Edited 5 hours ago by Wubster100

[Wubster100]

If it were me, I would use a third party software, FORScan, to reprogram the ABS module.

[John 2013 Edge]

Just now, Wubster100 said:

If it were me, I would use a third party software, FORScan, to reprogram the ABS module.

 

Are we certain this would work? If so, what hardware is required?