Wubster100 Posted October 1, 2024 Report Share Posted October 1, 2024 Finally finished installing ambient lighting in my 2021 Edge. The cup holders are OEM and everything else is aftermarket. The cup holders are only ice blue, and they are controlled by the SYNC screen. In each door, I installed a light in the door handle, door storage, and an LED strip along the door trim. I also installed 4 LED lights under the seats to light up the footwell areas. I also installed an LED strip above the glove box. All of the aftermarket lights are controlled by a hidden physical switch or with Bluetooth from my phone. I was able to get the cup holders for free by using Fordpass Points, and the aftermarket lights were only $34 USD (including shipping) for everything. Overall I am happy with the new ambiance. 3 1 Quote Link to comment Share on other sites More sharing options...
garycrist Posted October 1, 2024 Report Share Posted October 1, 2024 That looks marvelous! Great job!!! 1 Quote Link to comment Share on other sites More sharing options...
Tim W. AZ Posted October 1, 2024 Report Share Posted October 1, 2024 Nice work, looks great. 1 Quote Link to comment Share on other sites More sharing options...
Haz Posted October 2, 2024 Report Share Posted October 2, 2024 (edited) Your canine appears to be asking "What color is it now?" Good luck! Edited October 2, 2024 by Haz 3 Quote Link to comment Share on other sites More sharing options...
jsenkski Posted November 6, 2024 Report Share Posted November 6, 2024 Was the factory illuminated cup holders plug and play. Is there a plug already there for the cup holders? I have a 2024 ST-Line that I would like to put the illuminated cup holders in. Thanks 1 Quote Link to comment Share on other sites More sharing options...
Wubster100 Posted November 7, 2024 Author Report Share Posted November 7, 2024 On 11/6/2024 at 9:48 AM, jsenkski said: Was the factory illuminated cup holders plug and play. Is there a plug already there for the cup holders? I have a 2024 ST-Line that I would like to put the illuminated cup holders in. Thanks The factory illuminated cup holders were not plug and play for my vehicle. I did not have any wiring for ambient lighting from the factory. The cup holders have 2 wires for power, and one wire for “data” or the LIN bus. I had to insert a new wire into the BCM, and run it up to the cup holders. I also had to make changes in FORScan to enable the ambient lighting controls on the touchscreen. Quote Link to comment Share on other sites More sharing options...
Brandon123 Posted December 6, 2024 Report Share Posted December 6, 2024 that looks awesome 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.