Jump to content

SSM 52788 - 2024 Nautilus + Other Models - Various AWD Warning Messages Displayed In The Message Center With Loss Of AWD Function - Diagnostic Trouble Codes (DTCs) C0095, C05D9:74, P060A, P060B, P060C, And/Or P1674


Recommended Posts

 
 
SSM 52788 - 2023-2024 Escape/Corsair, 2024 Nautilus - All Wheel Drive (AWD) - Various AWD/4WD/4x4 Warning Messages Displayed In The Message Center With Loss Of AWD Function - Diagnostic Trouble Codes (DTCs) C0095, C05D9:74, P060A, P060B, P060C, And/Or P1674
 
Some 2023-2024 Escape/Corsair, 2024 Nautilus vehicles may exhibit various AWD/4WD/4x4 warning messages displayed in the message center with loss of AWD function for the remainder of the active key cycle. DTCs C0095, C05D9:74, P060A, P060B, P060C, and/or P1674 may be stored in the AWD module. This condition may be due to the software in the AWD module. To correct the condition, reprogram the AWD module using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. Clear DTCs after programming is complete. Start the vehicle and place the vehicle into drive (D) for at least 45 seconds, then back into park (P). Recheck for DTCs and if no DTCs are present in the AWD module, the repair is complete. If any DTCs return, follow the applicable diagnostic pinpoint test (PPT) steps found in Workshop Manual (WSM), Section 307-07A to correct the condition. For claiming use casual part 7P238 and applicable labor times in Section 10 of the Service Labor Time Standards (SLTS) Manual.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...