Pat1911a1 Posted June 21 Report Share Posted June 21 Ok , picked up my wife’s 2024 edge titanium yesterday. Salesman dropped off a license plate bracket for it. I can’t find any information on how to install it. No videos or pictures have I been able to find so far. Has anyone mounted a plate bracket on a new edge? Please share any pics or tips. Thanks in advance Quote Link to comment Share on other sites More sharing options...
Pump Posted June 21 Report Share Posted June 21 My 2020 Titanium came without the front license plate bracket. Purchased a bracket and researched how to install it. Looked at YouTube and other forums and could not find any information. I was over thinking the installation and decided to ask my local mechanic to install the bracket. They took measurements, marked where the holes should be drilled and screwed the bracket in. Took them about 5 minutes to install. 2 Quote Link to comment Share on other sites More sharing options...
Haz Posted June 21 Report Share Posted June 21 (edited) The front license plate requirement in Ohio was eliminated on July 1, 2020, so there's no need to mount it, unless your wife has a personalized aftermarket plate for her new Edge. With that said, the bracket is pop-riveted to the upper bumper cover, on center with the grille's Ford logo... Good luck! Edited June 21 by Haz Quote Link to comment Share on other sites More sharing options...
Pat1911a1 Posted June 21 Author Report Share Posted June 21 Thanks Guys, figured it out. Drilling holes and self tapping screws. Good measuring job and should be good to go. Quilters plate have to have a home 😀 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.