Nazar Maksymiak Posted April 21 Report Share Posted April 21 Please, help with the front bumper connector the wiring broke a little I want to restore it, but I don't have a scheme (wiring diagram) Quote Link to comment Share on other sites More sharing options...
Haz Posted April 21 Report Share Posted April 21 (edited) Welcome to the Forum, @Nazar Maksymiak! To assist you, I need more information: Model Year of your vehicle; Model of your vehicle: Edge, MKX, Nautilus; Market region for which your vehicle was manufactured: Africa, Asia Pacific, Caribbean, Europe, Latin America, Middle East, North America; When seated in the driver seat looking forward, are the pictured connectors on the front right-hand corner or the front left-hand corner of the vehicle; The photos appear to show inline connectors, which join together two wiring harnesses, rather than being connected directly to a specific component, such as a headlamp or fog light. Is this true? This photo shows a clear need for restoration, so let's call that Connector "A"... Is Connector "A's" mating connector shown in any of your following photos, and if so, which photo(s)?... Among photos 1 & 3 & 4 & 5, are any of them showing the same connector from a different angle? Is Connector "A" the only connector you want to replace? Once I've received your answers, I should be able to provide you wiring diagram(s) and connector information. Attached below is a communication explaining Ford's Wiring Repair process to dealership Service technicians. Good luck! Ford General Service Bulletin - Wiring Repair - September 2015.pdf Edited April 21 by Haz 1 Quote Link to comment Share on other sites More sharing options...
Nazar Maksymiak Posted April 22 Author Report Share Posted April 22 Just now, Haz said: Welcome to the Forum, @Nazar Maksymiak! To assist you, I need more information: Model Year of your vehicle; Model of your vehicle: Edge, MKX, Nautilus; Market region for which your vehicle was manufactured: Africa, Asia Pacific, Caribbean, Europe, Latin America, Middle East, North America; When seated in the driver seat looking forward, are the pictured connectors on the front right-hand corner or the front left-hand corner of the vehicle; The photos appear to show inline connectors, which join together two wiring harnesses, rather than being connected directly to a specific component, such as a headlamp or fog light. Is this true? This photo shows a clear need for restoration, so let's call that Connector "A"... Is Connector "A's" mating connector shown in any of your following photos, and if so, which photo(s)?... Among photos 1 & 3 & 4 & 5, are any of them showing the same connector from a different angle? Is Connector "A" the only connector you want to replace? Once I've received your answers, I should be able to provide you wiring diagram(s) and connector information. Attached below is a communication explaining Ford's Wiring Repair process to dealership Service technicians. Good luck! Ford General Service Bulletin - Wiring Repair - September 2015.pdf 1.2 MB · 1 download To assist you, I need more information: Model Year 2020 Model of your vehicle: Ford Edge Titanium Market region : I can't say for sure. Bought at auction. If it helps, i can reset the bidfax link ( https://bidfax.info/ford/edge/19174443-ford-edge-titanium-2020-black-20l-4-vin-2fmpk3k96lba56268.html ) When seated in the driver seat looking forward, are the pictured connectors on the front left-hand corner These are the connectors thet connect the bumper wires Blinds, camera, hood lock, ect in my opinion, these are the braided wiring connectors whis the number K2GT-15K867-AE but i don't have their pinout or exact schematic And i'm not sure if they exactly, fit visually Quote Link to comment Share on other sites More sharing options...
Haz Posted April 22 Report Share Posted April 22 Thanks for the information you provided, which is useful, especially the BidFax link which shows the extent of restoration you are facing. Your Edge is a USA-market vehicle that initially was a rental vehicle for Enterprise Rent-A-Car in Las Vegas, Nevada, with one subsequent USA owner before the collision that apparently made it available to you... Attached below are PDF documents showing the Inline Connectors on the Edge's front left corner... If you require additional Connector details, or wiring diagrams specific to certain components, or fuller description of the Inline Connectors' pins-to-circuits and the components involved, just let me know. Good luck! Inline Connectors C139, C140, C192, C193 - Locations - 2020 Edge.pdf Inline Connector C193 - Circuit-Pin Details - 2020 Edge.pdf Inline Connector C192 - Circuit-Pin Details - 2020 Edge.pdf Inline Connector C140 - Circuit-Pin Details - 2020 Edge.pdf Inline Connector C139 - Circuit-Pin Details - 2020 Edge.pdf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.