m4rioo Posted Saturday at 06:32 PM Report Share Posted Saturday at 06:32 PM I do not have towing package. So its weird that I dont have hands free lid. Any idea ? VIN 2FMPK4K95PBA29008 2 Quote Link to comment Share on other sites More sharing options...
Haz Posted Saturday at 06:45 PM Report Share Posted Saturday at 06:45 PM (edited) Welcome to the Forum @m4rioo! Your Edge's Window Sticker shows the vehicle is Hands-Free equipped... Per @dabangsta's comment, take a look inside your Edge's rear bumper cover for the upper & lower Hands-Free Actuator Sensors... ...and ensure that the Actuator Sensors' electrical connectors are plugged into the Hands-Free Actuator Module... Please Note: The above illustrations are of a tow package-equipped Edge bumper cover. The upper & lower Hands-Free Actuator Sensors on your Edge will be one-piece, and not split ln two-pieces with an interconnecting wire like those shown above. Good luck! 2FMPK4K95PBA29008 - Window Sticker.pdf Edited Saturday at 07:19 PM by Haz 2 Quote Link to comment Share on other sites More sharing options...
m4rioo Posted Saturday at 06:59 PM Report Share Posted Saturday at 06:59 PM Is this a sticker from my car ? Can you please send me without highlighting liftgate i must check if I really dont have hands free liftgate. Thanks a lot ! 2 Quote Link to comment Share on other sites More sharing options...
Haz Posted Saturday at 07:01 PM Report Share Posted Saturday at 07:01 PM (edited) Your Edge's Window Sticker is attached below as a PDF document (as it also was in my previous post)... Good luck! 2FMPK4K95PBA29008 - Window Sticker.pdf Edited Saturday at 07:02 PM by Haz 2 Quote Link to comment Share on other sites More sharing options...
m4rioo Posted Saturday at 07:07 PM Report Share Posted Saturday at 07:07 PM Thx a lot, You are a life saver 1 Quote Link to comment Share on other sites More sharing options...
m4rioo Posted Sunday at 05:08 PM Report Share Posted Sunday at 05:08 PM I have one more question. Sorry for posting in this topic. Does anyone know what this part number is? I suspect it's an ashtray. Quote Link to comment Share on other sites More sharing options...
Wubster100 Posted Sunday at 05:13 PM Report Share Posted Sunday at 05:13 PM It is a storage mat. Similar to the rubber inserts inside of the cup holders or the top center of the dashboard. 1 Quote Link to comment Share on other sites More sharing options...
Haz Posted Sunday at 05:52 PM Report Share Posted Sunday at 05:52 PM Image showing installed Console Mat... Good luck! 2 Quote Link to comment Share on other sites More sharing options...
enigma-2 Posted Wednesday at 07:19 PM Report Share Posted Wednesday at 07:19 PM On 3/23/2025 at 1:52 PM, Haz said: Image showing installed Console Mat... Good luck! ???? There's a mat in there? 1 Quote Link to comment Share on other sites More sharing options...
Wubster100 Posted yesterday at 04:05 AM Report Share Posted yesterday at 04:05 AM 8 hours ago, enigma-2 said: ???? There's a mat in there? Yes, like this. My mat sort of just sits in place. 1 Quote Link to comment Share on other sites More sharing options...
Brandon123 Posted yesterday at 02:14 PM Report Share Posted yesterday at 02:14 PM On 3/23/2025 at 1:08 PM, m4rioo said: I have one more question. Sorry for posting in this topic. Does anyone know what this part number is? I suspect it's an ashtray. is there any way possible that this setup would be able to be installed in a 2013 sel? i would love ac and type c power 1 Quote Link to comment Share on other sites More sharing options...
dabangsta Posted yesterday at 05:52 PM Report Share Posted yesterday at 05:52 PM 3 hours ago, Brandon123 said: is there any way possible that this setup would be able to be installed in a 2013 sel? i would love ac and type c power The AC plug in has been handy a couple of times, but it is so limited. It is prone to kicking things plugged in (I have a very short 90 degree plug to move wall warts away so they don't get kicked). My 2019 has a 12v power port there, not the type c ports, but plenty of type c and type a adapters that sit flush in there. 1 Quote Link to comment Share on other sites More sharing options...
Wubster100 Posted yesterday at 06:07 PM Report Share Posted yesterday at 06:07 PM 3 hours ago, Brandon123 said: is there any way possible that this setup would be able to be installed in a 2013 sel? i would love ac and type c power I do not see any 2013 Edge equipped with OEM 120 v AC power. You will have to get an inverter and usb c plugs and install them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.