Hodgie Posted February 27 Report Share Posted February 27 I did a search on the forum ad nothing came up. Do 2011 tail lights fit on a 2010. I am looking to have amber turn signals. I know the electrical hook up is another thing. I just want to know if the physical fit is the same. Thanks Quote Link to comment Share on other sites More sharing options...
Hodgie Posted March 2 Author Report Share Posted March 2 70 views, no replies . . . . . . Quote Link to comment Share on other sites More sharing options...
omar302 Posted March 2 Report Share Posted March 2 Physically, they probably fit, but they will require some electrical modification. I don't know what. As Gen1 Edge (2007-2010) have a single bulb for the Turn signal & brake (all red). While Gen 1.5 Edge (2011-2014) have separate bulbs for Turn signal (amber) & brakes (red). 1 Quote Link to comment Share on other sites More sharing options...
Haz Posted March 2 Report Share Posted March 2 (edited) I normally wait until 100 views, because most Forum members are more experienced than I am. (Just kidding about the former, but serious about the latter.) 2010 Edge Wiring Diagram and Park/Stop/Turn Connector Details 2011 Edge Wiring Diagram and Park/Stop/Turn Connector Details Good luck! Edited March 2 by Haz 2 Quote Link to comment Share on other sites More sharing options...
Hodgie Posted March 2 Author Report Share Posted March 2 Thanks guys. Looks like I will have to use the third brake light to feed the red bulbs in the 2011. And run turn signal wires from the front. Hodgie Quote Link to comment Share on other sites More sharing options...
Haz Posted March 3 Report Share Posted March 3 I have no direct experience with them, but perhaps you could use an aftermarket 2-to-3 tail light adapter module, like those used in Recreational Vehicle (RV) applications. For example -- this adapter, or this adapter, or this adapter. Good luck! Quote Link to comment Share on other sites More sharing options...
MDrumm03 Posted 9 hours ago Report Share Posted 9 hours ago On 3/1/2024 at 11:19 PM, Haz said: I normally wait until 100 views, because most Forum members are more experienced than I am. (Just kidding about the former, but serious about the latter.) 2010 Edge Wiring Diagram and Park/Stop/Turn Connector Details 2011 Edge Wiring Diagram and Park/Stop/Turn Connector Details Good luck! Hi Haz, any chance you’d be able to send these documents to me? Looks like they’re no longer working. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.