Haz Posted October 18, 2022 Report Share Posted October 18, 2022 (edited) Original ALERT Announcement - 2021 Edge - Sirius Radio Inoperative After APIM Update - October 17, 2022 Certain 2021 Edge vehicles which have received an APIM software update may experience a concern with Sirius radio being inoperative. This will be accompanied by audio control module (ACM) DTC B1A89:13 for the satellite antenna. Engineering is investigating this concern. Monitor PTS for updates. Edited October 28, 2022 by Haz 1 Quote Link to comment Share on other sites More sharing options...
Haz Posted October 27, 2022 Author Report Share Posted October 27, 2022 (edited) Oct 27 2022 - Resolved - Edge - Sirius Radio Inoperative After APIM Update Resolved - Certain 2021 Edge vehicles which have received an APIM software update may experience a concern with Sirius radio being inoperative. Refer to SSM 51163. Edited October 28, 2022 by Haz Quote Link to comment Share on other sites More sharing options...
Haz Posted October 28, 2022 Author Report Share Posted October 28, 2022 SSM 51163 2021 Edge - Sirius Radio Inoperative With Audio Control Module (ACM) DTC B1A89:13 - After APIM Software Update Some 2021 Edge vehicles which have received an APIM software update may experience a concern with Sirius radio being inoperative. This will be accompanied by ACM diagnostic trouble code (DTC) B1A89:13 for the satellite antenna. To correct this condition, download and run the APIM Programmable Module Installation (PMI) application using the latest software level of the Ford Diagnosis and Repair System (FDRS). When the PMI asks, Is The Original Module Installed?, select NO. When the PMI completes, perform an ALL CMDTC test and clear all DTCs. For claiming, use causal part 14G670 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.