Chris71Mach1 Posted September 28, 2022 Report Share Posted September 28, 2022 So my 2010 3.5L has fallen victim to the age-old issue of the water pump seals failing and leaking coolant into the engine. Yippee, my motor is toast. I'm looking for a re-manufactured engine (I just don't trust the ticking time bomb that would be a junk yard donor engine), and I find that everybody has options of either with or without the engine oil cooler. How do I check and tell if my 2010 has that cooler so I can make sure to choose the right engine to swap into this thing? Quote Link to comment Share on other sites More sharing options...
DILLARD000 Posted October 5, 2022 Report Share Posted October 5, 2022 (edited) 2007~2010 Edge 3.5L likely does NOT have the OilCooler; it would be connected to fittings between the block & OilFilter, on front side of the transverse engine, directly below dipstick; should be able to see+check this from underneath. Edited October 5, 2022 by DILLARD000 Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted October 5, 2022 Report Share Posted October 5, 2022 If your edge came from factory with the tow package it will have the oil cooler. and yeah the adapter + extra tubing is hard to miss. https://parts.levittownfordparts.com/v-2010-ford-edge--sel--3-5l-v6-gas/cooling-system--oil-cooler if you dont have the cooler you can still buy an engine with the cooler and simply discard those fittings. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.