2kool Posted April 20, 2022 Report Share Posted April 20, 2022 Swapped in a new air filter a few weeks ago and appears I loosened the wire connector to the MAF. I got an advance trak control error and a few hard lurches of vehicle. felt like it was running very poorly all of sudden and was not sure I was going to make it home. I scanned for codes and it showed 2 errors of the same code P0102. MAF looked brand new but the plastic wire bundle that connects looked as if it were 1/2 way disconnected. I pushed it back on and tried to lock it down with the little red tab but it still seems to pullout without really locking on. cleared codes and a test ride shows all was back to normal. did or can a P0102 cause the advance trak error to illuminate on dash? P0102 was the only code it threw. Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted April 20, 2022 Report Share Posted April 20, 2022 yes maf related errors can trigger all kinds of warnings and codes as it feeds into the ABS and electronic stability algorithms. 1 Quote Link to comment Share on other sites More sharing options...
2kool Posted April 20, 2022 Author Report Share Posted April 20, 2022 Thank you for reply, I was sure hoping that was the cause, and now see most likely it was. No need to re set ECU I am thinking for just the disconnect and reconnect?. Thank you again for your input. Quote Link to comment Share on other sites More sharing options...
enigma-2 Posted April 24, 2022 Report Share Posted April 24, 2022 Lock it back on with a plastic wire tie. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.