blu98ta Posted November 22, 2008 Report Share Posted November 22, 2008 Anyone hardwired a radar detector in the edge?? How did you do it, and what wire did you tap into, or did you plug into a fuse box? Quote Link to comment Share on other sites More sharing options...
Lex Talionis Posted November 22, 2008 Report Share Posted November 22, 2008 here and here Quote Link to comment Share on other sites More sharing options...
IV XX Posted June 1, 2011 Report Share Posted June 1, 2011 Get a flashlight (preferrably one you can hold in your mouth), an adjustable wrench and (possibly)some wire strippers Tap the fuse on #35. (You can get an official 'fuse tap' from Radio Shack for less than $5, or just stripped the wire, pull the fuse, wrapped wire around one side of the fuse and put the fuse back in.. ) Now run the other wire (Neg) to somewhere on the frame. ..I found a bolt that I loosened and jammed the wire behind and re-tightened. Now run wire up door seal to A pillar trim (the hard plastic piece that is between your door and windshield). tuck behind A pillar trim up to the headliner. tuck wire up behind headliner and run to detector. Takes about 5-10minutes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.