jamespenkala Posted June 7, 2021 Report Share Posted June 7, 2021 I have a 2014 ford edge sel an my back up camera works when it feels like sometimes it does other times no help with direction to fix?? Quote Link to comment Share on other sites More sharing options...
enigma-2 Posted June 7, 2021 Report Share Posted June 7, 2021 You will need to read the codes to pin down where to start. Failures run the gauntlet from a failing Image Processing Module, to corroded connector, camera or frayed wires. 1 Quote Link to comment Share on other sites More sharing options...
mdjbhouse Posted July 10, 2021 Report Share Posted July 10, 2021 Not sure if it's cool to hijack someone's else's thread but figured rather than create 'another backup camera post' I would add what I am getting. Most of the posts I have found are quite a few years old so maybe there is more knowledge available now? Just asking before I try an amazon replacement from china. This is what I get from Forscan: ===APIM DTC C1001:01-68=== Code: C1001 - Vision System Camera Additional Fault Symptom: - General Electrical Failure Status: - Previously Set DTC - Not Present at Time of Request - Malfunction Indicator Lamp is Off for this DTC - Test not complete Module: Accessory Protocol Interface Module ===END APIM DTC C1001:01-68=== I'm also getting some ABS errors but I assume that is unrelated. Quote Link to comment Share on other sites More sharing options...
omar302 Posted July 11, 2021 Report Share Posted July 11, 2021 (edited) Although this video is for an Explorer, the same thing might also be happening: Edited July 11, 2021 by omar302 Quote Link to comment Share on other sites More sharing options...
mdjbhouse Posted July 11, 2021 Report Share Posted July 11, 2021 Thanks. It very well could be a cabling issue but I think if I am in there taking at all apart I might as well just buy a replacement camera as this vehicle is close to 10 years old. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.