Dacker Posted May 20, 2021 Report Share Posted May 20, 2021 I say new because I've searched and haven't found any with this exact problem. I have an 07 Edge that cranks fine but I am getting no power to the coil wires with the switch on. I'm getting pulse from the PCM on the injectors and The coil wires but am I not correct in thinking the other coil wire that isn't pulsing should have 12v constant with the key on? If so what would be the suggestion on where to start on figuring out why they're not? I'm sure it's probably something simple like a relay but let's just say trouble shooting electrical isn't my strong point so any advice on where to start is appreciated. Thanks in advance.... Dale Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.