t0lkman Posted October 10, 2020 Report Share Posted October 10, 2020 My car was rear-ended, the damage was pretty severe because I had a trailer hitch and the hit was strong enough to damage the frame. the insurance has restored the ca by replacing the right rail. But now when I drive the car is pulling right when I accelerate let's say from 40mph to 60mph. The body shop has made the wheel alignment twice, but the car still pulls right. What I have noticed at a low speed e.g. 40-50mph when coasting it's driving straight. However, it's still pulling right even when cruising/coasting on 70-80mph. The body shop doesn't know how to fix it because the wheel alignment specs show everything within a norm. Do you think the replacement of the frame parts could cause the issue? But then why wheel alignments show everything in spec? When I drive on highways there is constant pressure on hands to keep the wheel, so the car drives straight... that's pretty annoying.. Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted October 11, 2020 Report Share Posted October 11, 2020 (edited) could be bad tires, could be the subframe (front or rear) was knocked about, or the control arms are shot. I would also check to see if the inner tie rods are binding. Edited October 11, 2020 by WWWPerfA_ZN0W Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.