tyyrael Posted June 25, 2020 Report Share Posted June 25, 2020 Are there any options out there for the Honeycomb grill and still be able to have the camera attached? In a perfect world, I'd be able to get the eBay honeycomb grill and then mount the camera on it somewhere and completely remove the Ford emblem, but since the camera and emblem are combined I'm not sure I have any other options. Well.... it's not really "combined" but it is hard-mounted right under it. https://ebay.to/2BGX2NC for the honeycomb grill Quote Link to comment Share on other sites More sharing options...
Gadgetjq Posted June 25, 2020 Report Share Posted June 25, 2020 I might be blowing (Ford blue) smoke here since I've no experience with that grille but....couldn't you just make your own adapter? Grab some flat stock cut to whatever length/width you need (aluminum would be easy to work with) and drill holes patterned after the OEM openings plus a third hole for a mounting bolt or stud. Paint it black. Mount the camera in your adapter, put it wherever you want on the new grille (you might have to modify the grille a little for the camera to fit through the grid) than use that bolt or stud and a large washer on the back of the grille to hold it in place. If you want you could cut away some of the new grille to inset your adapter so it's a flush mount. There's always a way. Quote Link to comment Share on other sites More sharing options...
Nick Halstead Posted June 25, 2020 Report Share Posted June 25, 2020 The vignale replica has the camera setup https://www.ebay.com/itm/401788278468 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.