IcyFridge Posted May 26, 2020 Report Share Posted May 26, 2020 My 2019 Edge SE likes to wander a bit as I'm used to a sharper handling car. Are there any swaybar or suspension upgrades to make it not lean so much when turning? Quote Link to comment Share on other sites More sharing options...
Sage Posted May 26, 2020 Report Share Posted May 26, 2020 (edited) H&R offers different sport springs, but I believe all of those will lower your Edge. The ST came with beefed up sway bar and springs/shocks, those might fit a 2019 Edge. Not totally sure if they will, other members might know for sure. Edited May 26, 2020 by Sage Quote Link to comment Share on other sites More sharing options...
Xtra Posted May 28, 2020 Report Share Posted May 28, 2020 There are a few things that you can do. I found that adding a strut tower cross brace to my 2016 Sport helped immensely with steering in tight canyons. I had more control with less effort and the car would take a line better under load. You can also add an Addco rear sway bar to your car and some H&R Springs these three things will transform how your car handles. I tested these items by timing myself through a portion of the Mulholland Snake. Stock, the best I could run the top half of the Snake in was 1 min 14 seconds. After adding the X brace, springs and swaybar the time dropped to 1 min 4 seconds. That is 10 seconds and 14% faster up the hill I am sure that adding summer tires to my car also helped some. You can find all of these items here in the Ultimate 2.7TT Parts thread. Quote Link to comment Share on other sites More sharing options...
IcyFridge Posted May 31, 2020 Author Report Share Posted May 31, 2020 Where can I find this addco swaybar? And is it an easy swap (not having to drop exhaust/rear axle)? Not looking to lower my edge as I use it for off roading from time to time to get to the hunting cabin. Quote Link to comment Share on other sites More sharing options...
Xtra Posted May 31, 2020 Report Share Posted May 31, 2020 ADDCO Part # 2452 1.125 It is an easy swap. Please check the link I gave you for the locks that work with the sway bar. Contact Addco directly just Google Addco. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.