chefduane Posted August 13, 2019 Report Share Posted August 13, 2019 2011 Edge LTD. So my backup cam has gone upside down again and I am (trying) to (once again) reset it with FORSCAN. However, now Forscan only gets to 8% and then says "Reconfiguration aborted. Please run Self-Test to reset trouble codes." Well, I have reset every freaking trouble code that I had multiple times. There are no DTC's in ANY modules, but I still get the same error message. What am I not doing correctly? Is there some other 'Self-Test' somewhere that I should be running?? Any help would be appreciated. Thanks! Quote Link to comment Share on other sites More sharing options...
chefduane Posted August 14, 2019 Author Report Share Posted August 14, 2019 Anyone, anyone? Bueller, Bueller?? Quote Link to comment Share on other sites More sharing options...
candurin Posted August 16, 2019 Report Share Posted August 16, 2019 Was this the original camera or a replacement? Try recalibrating the Parking Aid Module first. 1 Quote Link to comment Share on other sites More sharing options...
chefduane Posted August 17, 2019 Author Report Share Posted August 17, 2019 Everything is stock. I'll try your suggestion. Thanks for responding! Quote Link to comment Share on other sites More sharing options...
candurin Posted August 17, 2019 Report Share Posted August 17, 2019 No worries. If I recall there was two distinct items that needed recalibration in forscan when I replaced my camera. Quote Link to comment Share on other sites More sharing options...
chefduane Posted August 20, 2019 Author Report Share Posted August 20, 2019 Well I reset the Parking Aid Module and the reconfiguration passed. Unfortunately now when I go run a Forscan scan there is no option to Reset Backup Camera. It has disappeared. I guess I am destined for a $2000 dealer camera installation. Weird thing is that the camera works just fine, its just upside down. If I could find a way to rotate the camera lens 180 degrees, I would. Then be done with it. Also, I assume that I am on Sync 3 as I have an '11 Limited with all bells and whistles. It keeps asking me what Sync version I am on. Thanks again for any information/suggestions you might offer. Duane Quote Link to comment Share on other sites More sharing options...
candurin Posted August 21, 2019 Report Share Posted August 21, 2019 Duane, You are on Sync 2. Sync 3 was introduced in 2016 on the Edge. It seems as though your camera may truly be on the way out, based on what you describe. I would try and reconfigure using the proper sync setting (although I’m not sure that is the cause of your issue). No need to spend $2000 at all. I did it for just over $200 and under an hour of my time, assuming you have a few basic tools (Torx and flathead screwdrivers, sockets, etc): https://www.fordedgeforum.com/topic/11361-rear-view-camera-guidelines-are-missing/?do=findComment&comment=198575 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.