Gadgetjq Posted August 18, 2019 Report Share Posted August 18, 2019 On 8/17/2019 at 8:46 AM, Project_Edge said: Did you put a good filter in like a K&N or AEM DryFlow? P.E. Do you have a part number for an AEM filter that fits the Gen2 3.5L Edge? Their website doesn't show any Edge application at all. Cheers! Quote Link to comment Share on other sites More sharing options...
Project_Edge Posted August 19, 2019 Report Share Posted August 19, 2019 7 hours ago, 1004ron said: The stock air filter is designed to accommodate max flow (wide open throttle at high rpm) without a pressure drop that could impact performance - very few folks would operate near max flow, so unless you're racing and want to squeeze out every minute bit of performance, there'd be nothing gained paying a premium for those filters. So why wouldn't you just make that comment rather than asking me what I thought was wrong with the OE filter? Quote Link to comment Share on other sites More sharing options...
Project_Edge Posted August 19, 2019 Report Share Posted August 19, 2019 6 hours ago, Gadgetjq said: P.E. Do you have a part number for an AEM filter that fits the Gen2 3.5L Edge? Their website doesn't show any Edge application at all. Cheers! No I don't sorry. Quote Link to comment Share on other sites More sharing options...
1004ron Posted August 19, 2019 Report Share Posted August 19, 2019 1 minute ago, Project_Edge said: So why wouldn't you just make that comment rather than asking me what I thought was wrong with the OE filter? Its a legitimate question - what's your actual problem with that? So, what is it with the OEM filter that you consider makes it a poor choice? Quote Link to comment Share on other sites More sharing options...
Project_Edge Posted August 19, 2019 Report Share Posted August 19, 2019 I refer you to my previous answer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.