flyn_dutchman Posted July 24, 2019 Report Share Posted July 24, 2019 Hello all! My first post on here as I am a new member! Great info resource we have here! I have just purchased a 2018 Titanium for my wife, and the previous owner swapped out the stock OEM air box assembly for a K&N CAI system (he didn't keep the OEM parts). He also removed the top appearance cover over the top of the engine (I would also like to get this put back on). I would rather go back to the stock look and I am wondering if anyone has put this CAI system in themselves, and if there are any issues with going back to OEM parts? If anyone wants to swap stock for K&N CAI, please let me know, otherwise I will just get the OEM parts here locally and sell the K&N system in Classifieds. Thanks, and thanks for all the information on here! Quote Link to comment Share on other sites More sharing options...
onyxbfly Posted July 24, 2019 Report Share Posted July 24, 2019 (edited) Congrats! Welcome to the forum! the part you are looking for is FT4Z-6A949-B You're also going to need the two parts that are associated with it. https://parts.levittownfordparts.com/auto-parts/2018/ford/edge/titanium-trim/3-5l-v6-gas-engine/engine-cat/engine-appearance-cover-scat HTH Edited July 24, 2019 by onyxbfly 1 Quote Link to comment Share on other sites More sharing options...
1004ron Posted July 25, 2019 Report Share Posted July 25, 2019 Congrats on your purchase. I would also look at going back to the stock air intake, which will actually draw in COLD air vs that intake drawing in warm air from the engine compartment. 2 Quote Link to comment Share on other sites More sharing options...
flyn_dutchman Posted July 25, 2019 Author Report Share Posted July 25, 2019 13 hours ago, 1004ron said: Congrats on your purchase. I would also look at going back to the stock air intake, which will actually draw in COLD air vs that intake drawing in warm air from the engine compartment. Thanks for the input ONYXBFLY and 1004ron. I am getting very crappy MPG in it right now, do any of you think the MPG goes down with the CAI in it? I know it increases HP, and my thoughts are the CAI may cause bad MPG? Quote Link to comment Share on other sites More sharing options...
Perblue Posted July 25, 2019 Report Share Posted July 25, 2019 It shouldn't affect mileage much at all. How many miles are on the vehicle? Quote Link to comment Share on other sites More sharing options...
Gadgetjq Posted July 25, 2019 Report Share Posted July 25, 2019 1 hour ago, flyn_dutchman said: I know it increases HP, and my thoughts are the CAI may cause bad MPG? Actually, that's debatable. You 'might' have the capability to draw more air into the engine with the aftermarket system but if that's just a lot of hot air and nothing has been done to get more air 'out' of the engine then all the K&N is doing is making noise. As for your fuel mileage, what are you getting? At first I'd suggest using the old paper/pen method (miles/gallons) to check your 'actual' mpg against whatever the digital gauge is showing. That way you'll know how far off the digital unit is (if any) tank to tank. While you're calibrating to your new car, use a gps (or app on your phone) to track your MPH figure and compare it against the car's speedo. You'll probably discover the Edge is reporting a number a little higher than what the GPS shows you. Cheers! 3 Quote Link to comment Share on other sites More sharing options...
flyn_dutchman Posted July 25, 2019 Author Report Share Posted July 25, 2019 5 hours ago, Perblue said: It shouldn't affect mileage much at all. How many miles are on the vehicle? It has 28K mileage. Quote Link to comment Share on other sites More sharing options...
Perblue Posted July 26, 2019 Report Share Posted July 26, 2019 Looking at your pic you've got a black tube running off to the left off the intake, someone can confirm what it is and if I'm wrong, but that massive 90 degree kink doesn't seem right and could be the culprit. 2 Quote Link to comment Share on other sites More sharing options...
Project_Edge Posted July 26, 2019 Report Share Posted July 26, 2019 The hose that is kinked looks like the clean side PCV. The MAF housing is capped off too which is strange. Also, K&N does not list a "cold air" intake on their site for this application. I'm thinking this intake if for something else and does not belong on this vehicle. I would remove it and put a stock air box back on (maybe with a good performance type filter) and you should see improved mileage right away. Just my .02 cents. 1 Quote Link to comment Share on other sites More sharing options...
flyn_dutchman Posted July 26, 2019 Author Report Share Posted July 26, 2019 3 hours ago, Project_Edge said: The hose that is kinked looks like the clean side PCV. The MAF housing is capped off too which is strange. Also, K&N does not list a "cold air" intake on their site for this application. I'm thinking this intake if for something else and does not belong on this vehicle. I would remove it and put a stock air box back on (maybe with a good performance type filter) and you should see improved mileage right away. Just my .02 cents. Thanks for the replies from you and Perblue! I am also worried about that "kink" in the hose. I don't know what it goes to, but that can't be good in any fashion no matter where it goes? I also tried to look up a K&N for my Edge and noticed it did not list one at all, so I think you are on the right track! I am planning on going back to full stock air and appearance cover (he threw them all away!!? (AAAGHHH!) Quote Link to comment Share on other sites More sharing options...
Perblue Posted July 26, 2019 Report Share Posted July 26, 2019 36 minutes ago, flyn_dutchman said: Thanks for the replies from you and Perblue! I am also worried about that "kink" in the hose. I don't know what it goes to, but that can't be good in any fashion no matter where it goes? I also tried to look up a K&N for my Edge and noticed it did not list one at all, so I think you are on the right track! I am planning on going back to full stock air and appearance cover (he threw them all away!!? (AAAGHHH!) Try checking the wrecking yards there have been more than a few edges sold from 2015-18 with the 2.0l. A stock air box from an SE to Titanium with a 2.0L should work fine, if you hadn't considered it. 2 Quote Link to comment Share on other sites More sharing options...
onyxbfly Posted July 26, 2019 Report Share Posted July 26, 2019 1 hour ago, Perblue said: Try checking the wrecking yards there have been more than a few edges sold from 2015-18 with the 2.0l. A stock air box from an SE to Titanium with a 2.0L should work fine, if you hadn't considered it. If no one wants to trade with you, and you can't find a used one from a yard. A new complete assembly is available for $152.82: https://parts.levittownfordparts.com/oem-parts/ford-air-cleaner-assembly-f2gz9600c?c=Zz1lbmdpbmUmcz1haXItaW50YWtlJmw9MSZuPUFzc2VtYmxpZXMgUGFnZSZhPWZvcmQmbz1lZGdlJnk9MjAxOCZ0PXRpdGFuaXVtJmU9My01bC12Ni1nYXM%3D Quote Link to comment Share on other sites More sharing options...
flyn_dutchman Posted July 28, 2019 Author Report Share Posted July 28, 2019 On 7/26/2019 at 10:36 AM, Perblue said: Try checking the wrecking yards there have been more than a few edges sold from 2015-18 with the 2.0l. A stock air box from an SE to Titanium with a 2.0L should work fine, if you hadn't considered it. I thought of that too, as it can't be too hard to find, right? Lol Thanks for the ideas Quote Link to comment Share on other sites More sharing options...
flyn_dutchman Posted July 30, 2019 Author Report Share Posted July 30, 2019 On 7/26/2019 at 6:08 AM, Project_Edge said: The hose that is kinked looks like the clean side PCV. The MAF housing is capped off too which is strange. Also, K&N does not list a "cold air" intake on their site for this application. I'm thinking this intake if for something else and does not belong on this vehicle. I would remove it and put a stock air box back on (maybe with a good performance type filter) and you should see improved mileage right away. Just my .02 cents. So in my endeavor to go back to stock, I need to find out what other parts or hoses, tubes, etc. that I need to replace? You mentioned the "clean side PVC" and MAF housing, both which I have no idea what they are? Can you see in the pic, or is there a place where I can find a "parts list" and exploded view of the whole system to not miss something? Thanks for all your knowledge and help! Quote Link to comment Share on other sites More sharing options...
Unlimited Posted July 30, 2019 Report Share Posted July 30, 2019 You should call some wrecking yards find one that has your exact car and buy what you need, you'll save a ton of money. Quote Link to comment Share on other sites More sharing options...
Project_Edge Posted July 31, 2019 Report Share Posted July 31, 2019 11 hours ago, flyn_dutchman said: So in my endeavor to go back to stock, I need to find out what other parts or hoses, tubes, etc. that I need to replace? You mentioned the "clean side PVC" and MAF housing, both which I have no idea what they are? Can you see in the pic, or is there a place where I can find a "parts list" and exploded view of the whole system to not miss something? Thanks for all your knowledge and help! I am not totally familiar with the 3.5L NA engine in the Edge but I do know that you will need the entire air intake (including filter) and the hose you see in your pic. It is kinked and looks like one of the connectors was removed to attach it to the K&N. As far as the MAF (Mass Air Flow Sensor) I was referring to the K&N intake's MAF housing was capped off providing evidence that it was not meant for your engine. These pics are from the links provided earlier. Maybe talk to your dealerships parts department to confirm the part numbers and start shopping for deals. 1 Quote Link to comment Share on other sites More sharing options...
flyn_dutchman Posted August 9, 2019 Author Report Share Posted August 9, 2019 I finally got all the parts and went back to stock Air Cleaner system. I feel better now ? We'll see how/if it changes/improves MPG? Thanks for everyone's input and help! You guys Rock! 5 Quote Link to comment Share on other sites More sharing options...
Perblue Posted August 9, 2019 Report Share Posted August 9, 2019 Looks so much better, especially without the kink!? 1 Quote Link to comment Share on other sites More sharing options...
1004ron Posted August 9, 2019 Report Share Posted August 9, 2019 So much better. That previous intake to me just smacks of boy racer and would have made me think twice about buying. 1 Quote Link to comment Share on other sites More sharing options...
Project_Edge Posted August 9, 2019 Report Share Posted August 9, 2019 Quote Link to comment Share on other sites More sharing options...
Project_Edge Posted August 17, 2019 Report Share Posted August 17, 2019 On 8/8/2019 at 6:00 PM, flyn_dutchman said: I finally got all the parts and went back to stock Air Cleaner system. I feel better now ? We'll see how/if it changes/improves MPG? Thanks for everyone's input and help! You guys Rock! How's she running? Better? Did you put a good filter in like a K&N or AEM DryFlow? Quote Link to comment Share on other sites More sharing options...
1004ron Posted August 18, 2019 Report Share Posted August 18, 2019 21 hours ago, Project_Edge said: How's she running? Better? Did you put a good filter in like a K&N or AEM DryFlow? What's wrong with the stock Motocraft filter? Quote Link to comment Share on other sites More sharing options...
Project_Edge Posted August 18, 2019 Report Share Posted August 18, 2019 2 hours ago, 1004ron said: What's wrong with the stock Motocraft filter? Nothing really. But you can get better air-flow with a K&N or AEM Dryflow. Quote Link to comment Share on other sites More sharing options...
1004ron Posted August 18, 2019 Report Share Posted August 18, 2019 1 hour ago, Project_Edge said: Nothing really. But you can get better air-flow with a K&N or AEM Dryflow. The stock air filter is designed to accommodate max flow (wide open throttle at high rpm) without a pressure drop that could impact performance - very few folks would operate near max flow, so unless you're racing and want to squeeze out every minute bit of performance, there'd be nothing gained paying a premium for those filters. 1 Quote Link to comment Share on other sites More sharing options...
handfiler Posted August 18, 2019 Report Share Posted August 18, 2019 1 hour ago, Project_Edge said: Nothing really. But you can get better air-flow with a K&N or AEM Dryflow. What sucks more swallows more. I'll stick with the factory paper filters and the superior filtration they provide. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.