pbeanbag Posted June 8, 2019 Report Share Posted June 8, 2019 I am getting 2 choices for the cylinder order on my 2007 Edge SEL. Images show only the H vin code not the C The videos on repairs show #2 being in the rear by the firewall next to the PCV valve but my diagnostic reader shows #2 as being in front ( confirmed by unplugging the coil pack and getting a bad coil reading) So could someone confirm this for me? I have a skip and an exhaust noise ( it sounds like a puffing) . The injector for that cylinder is also good but showing a code. I am thinking the OBD reader is wrong since i never pulled the coil in the rear bank. also, it sounds like an EGR leak. when the check engine light is solid it runs ok , blinking it runs horrible. Can it just be a blown EGR valve? thanx Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted June 10, 2019 Report Share Posted June 10, 2019 Firewall side 1-2-3 Radiator side 4-5-6 Left to right, looking at the engine from the front of the vehicle. 1 Quote Link to comment Share on other sites More sharing options...
Zack b Posted November 2 Report Share Posted November 2 Thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.