Jump to content

Edge `07 SEL - Traction Control & Brake System Warning Lights Up


Recommended Posts

Hi Guys,

 

I just came back from holidays with mit Edge, and on the Autobahn these two warning lights came up sporadically. Sometimes it came up on bumps, then it goes out on the next bump, then it came up when I went down the hill or when I accelerated.... really very.

Sometimes it was on for 10 minutes, then nothing was lighting up for 2 hours...

 

 

What could be the problem? Brake Fluid is full.

I have noticed one tire had less pressure, but nothing changed after I filled it up again.

Link to comment
Share on other sites

  • 4 weeks later...

Unfortunately, it is usually the sensor ring, a toothed ring attached to the halfshaft. Look for it behind the wheel and see if it is cracked, corroded, or damaged.

 

If you're lucky, it will be the sensor, which is fairly cheap and easy to replace.

Do you have a Diagram or picture of the sensor ring.

 

Also can you give me a link to the part on rockauto.com

 

 

BTW.... the error codes my buddy has found are:

 

C1140-20

B1320

B1485

B1696

C1125-20

Edited by CivicSi907
Link to comment
Share on other sites

I have had a similar problem as well. My bet it is the Tone Ring. I have had that on two (or three?) wheels on my Edge and the system acts a bit weird. I am dealing with it on my Daughter's 2008 Ford Escape. In researching it on the Escape I found this write-up and thought it is very applicable to the Edge as well. Nicely written with photos.

 

https://therangerstation.com/forums/showthread.php?t=85395

  • Like 1
Link to comment
Share on other sites

I have had a similar problem as well. My bet it is the Tone Ring. I have had that on two (or three?) wheels on my Edge and the system acts a bit weird. I am dealing with it on my Daughter's 2008 Ford Escape. In researching it on the Escape I found this write-up and thought it is very applicable to the Edge as well. Nicely written with photos.

 

https://therangerstation.com/forums/showthread.php?t=85395

My mechanic and me checked all 4 tone rings. And they look fine. Anyway...why does the lights just go on in the morning tow and after a few driving meters they go off and stay off.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...