EdgeEh Posted August 23, 2018 Report Share Posted August 23, 2018 I'm trying to change the factory license plate bulb to an LED (saw a Sylvania 168 LED bulb on sale at a local shop), but I'm having trouble removing the cover. I could not find any guides online for the Gen 2 Edge. I don't want to pry it and end up breaking it. I have uploaded an image of the bulb cover. Any help will be appreciated. Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted August 23, 2018 Report Share Posted August 23, 2018 (edited) should be a clip inside the "hole"/cavity on the right side of the bulb housing. probably need a slim flatblade screwdriver to get it to unlatch. On some vehicles there are actually philips head screws holding in the assembly, but this looks like just a tabbed arrangement. Not on an Edge but should be similar Edited August 23, 2018 by WWWPerfA_ZN0W Quote Link to comment Share on other sites More sharing options...
EdgeEh Posted August 23, 2018 Author Report Share Posted August 23, 2018 should be a clip inside the "hole"/cavity on the right side of the bulb housing. probably need a slim flatblade screwdriver to get it to unlatch. On some vehicles there are actually philips head screws holding in the assembly, but this looks like just a tabbed arrangement. Not on an Edge but should be similar Tabbed License Plate Lamp Assembly Example for Gen 2 Edge.jpg Nice picture. I will give it a try and report back. Thanks! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.