Duece McCracken Posted June 18, 2020 Report Share Posted June 18, 2020 Just installed my ramfab pipe and UP fmic. It's Brembo burnt Orange iirc, comes pretty close to Electric Spice metallic. Fantastic piece. Great guy to deal with! 3 Quote Link to comment Share on other sites More sharing options...
tyyrael Posted June 19, 2020 Report Share Posted June 19, 2020 Nice!!! You get any kind of noticeable benefit? I'm sure the IAT's are lower and maybe even hear some sound differences through that metal piping. I might be interested in doing this sometime soon Quote Link to comment Share on other sites More sharing options...
Duece McCracken Posted June 19, 2020 Report Share Posted June 19, 2020 4 hours ago, tyyrael said: Nice!!! You get any kind of noticeable benefit? I'm sure the IAT's are lower and maybe even hear some sound differences through that metal piping. I might be interested in doing this sometime soon Well, I installed it with a UP FMIC, and only took it out real quick to try and blow the charge pipes on the highway. Im too lazy to build and run a boost leak tester for the twin setup. Immediately noticed better throttle response. Charge pipes held, boosting mid 22 psi iirc on a 93 unleashed tune using a BDX device. I am not on an updated tune for the fmic and charge pipe yet. Going to re-tune when im done installing the water meth. Overall, there is jack shit for aftermarket with this platform. So if you want gains there is a pretty well laid out stategy with not many variables. This cold side pipe is definitely an upgrade in the fliw department, but should be coupled with an aftermarket fmic for better overall performance. Mixing it with a bigger throttle body would help too, but for the 500 bucks BBK wants you could just run water meth. Being a direct injected ecoboost motor, there is carbon fouling on the intake valves that leads to issues. Wmi cleans them nicely. The other option is walnut blasting/manual scrubbing. So running water methanol injection helps all over the place. Which the Ram Fab has an option for a meth bung. Wins all way round. 3 Quote Link to comment Share on other sites More sharing options...
onyxbfly Posted April 15, 2022 Report Share Posted April 15, 2022 Happy Good Friday Guys and Gals, Quick heads up in regards to the FMIC cold pipe upgrade! RamFab is no longer making the cold pipe upgrade. he has passed on the tools and materials necessary to DTP Fab! DTB Fab can be reached via the following: https://dtpfabworks.com/ or https://www.instagram.com/dtp_fabworks/?hl=en Hope this clears up some confusion! 2 Quote Link to comment Share on other sites More sharing options...
johnsmi3 Posted May 23, 2022 Report Share Posted May 23, 2022 (edited) Immediately noticed better throttle response. Charge pipes held, boosting mid 22 psi iirc on a 93 unleashed tune using a BDX device. I am not on an updated tune for the fmic and charge pipe yet. Going to re-tune when i am done installing the water meth at smm panel deals. Edited May 23, 2022 by 1004ron 1 Quote Link to comment Share on other sites More sharing options...
Cerberus Posted August 6, 2022 Report Share Posted August 6, 2022 (edited) Disregard. failed to read. Edited August 6, 2022 by Cerberus Quote Link to comment Share on other sites More sharing options...
Xtra Posted August 6, 2022 Report Share Posted August 6, 2022 On 4/15/2022 at 8:21 AM, onyxbfly said: Happy Good Friday Guys and Gals, Quick heads up in regards to the FMIC cold pipe upgrade! RamFab is no longer making the cold pipe upgrade. he has passed on the tools and materials necessary to DTP Fab! DTB Fab can be reached via the following: https://dtpfabworks.com/ or https://www.instagram.com/dtp_fabworks/?hl=en Hope this clears up some confusion! I noticed that in the 2.7EB Ultimate Parts Thread that RamFab is stll listed as the source of the cold side pipe. 1 Quote Link to comment Share on other sites More sharing options...
onyxbfly Posted August 31, 2022 Report Share Posted August 31, 2022 On 8/6/2022 at 3:59 PM, Xtra said: I noticed that in the 2.7EB Ultimate Parts Thread that RamFab is stll listed as the source of the cold side pipe. My information comes directly from Colin and Jim. If you take a gander at the Ultimate Parts thread you will see that it hasn't been updated in quite some time. @Special_K or @snmjim would have to edit it, or have a mod do it. Or if someone is so inclined to check to see if they can order one from RamFab. Quote Link to comment Share on other sites More sharing options...
snmjim Posted August 31, 2022 Report Share Posted August 31, 2022 3 hours ago, onyxbfly said: My information comes directly from Colin and Jim. If you take a gander at the Ultimate Parts thread you will see that it hasn't been updated in quite some time. @Special_K or @snmjim would have to edit it, or have a mod do it. Or if someone is so inclined to check to see if they can order one from RamFab. Ramfab will point you in the right direction as to who he sold the rights to...? 1 Quote Link to comment Share on other sites More sharing options...
Scooter53 Posted September 6, 2022 Report Share Posted September 6, 2022 On 6/26/2018 at 6:36 PM, onyxbfly said: The Rambo modified IC Outlet/Cold pipe is ready for market at $230 a copy. This includes basic powder coat colors & shipment. Place your orders direct to: Ramfab27@gmail.com. Is it still available? Tried email but it says invalid Quote Link to comment Share on other sites More sharing options...
onyxbfly Posted September 6, 2022 Report Share Posted September 6, 2022 7 hours ago, Scooter53 said: Is it still available? Tried email but it says invalid 2 1 Quote Link to comment Share on other sites More sharing options...
Cerberus Posted September 6, 2022 Report Share Posted September 6, 2022 5 hours ago, onyxbfly said: FWIW, I sent them (DTP Fab) a msg through their site form, asking for a quote for the cold pipe with meth bung, cerakoted, and never heard back from them 1 1 Quote Link to comment Share on other sites More sharing options...
onyxbfly Posted September 6, 2022 Report Share Posted September 6, 2022 4 hours ago, Cerberus said: FWIW, I sent them (DTP Fab) a msg through their site form, asking for a quote for the cold pipe with meth bung, cerakoted, and never heard back from them SMDH!! Not that it helps, but their Instagram is fairly active. Their most recent post was of yesterday. Drop them a line via IG. 1 Quote Link to comment Share on other sites More sharing options...
Cerberus Posted September 6, 2022 Report Share Posted September 6, 2022 3 hours ago, onyxbfly said: SMDH!! Not that it helps, but their Instagram is fairly active. Their most recent post was of yesterday. Drop them a line via IG. I know you're going think I'm a dinosaur for saying this, but I don't do IG.. i guess i know what I have to do lol Quote Link to comment Share on other sites More sharing options...
onyxbfly Posted September 7, 2022 Report Share Posted September 7, 2022 14 hours ago, Cerberus said: I know you're going think I'm a dinosaur for saying this, but I don't do IG.. i guess i know what I have to do lol Nah not at all, I'm not a big fan of social media. Although, I do understand and respect those that do. I just don't feel the need to put my life on display. 2 1 Quote Link to comment Share on other sites More sharing options...
Cerberus Posted March 2, 2023 Report Share Posted March 2, 2023 On 9/7/2022 at 8:48 AM, onyxbfly said: Nah not at all, I'm not a big fan of social media. Although, I do understand and respect those that do. I just don't feel the need to put my life on display. finally got on IG.. just to track down performance specialists like Jim and DTP fab .. summer is coming, time to make it faster Quote Link to comment Share on other sites More sharing options...
Fidelcashflow1 Posted January 13 Report Share Posted January 13 The factory pipe has a quick detach that ramfab/dtps brass fitting doesnt fit? How did you guys all get around that? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.