Xtra Posted January 6, 2021 Report Share Posted January 6, 2021 Because of the mix up with the carbon material, I went ahead and ordered up one extra sheet of the carbon fiber material to arrive with the exchange. So that means that there is one carbon intake that is not spoken for and is available in this run. The black ABS intake is also still available in this run, for anyone interested. Time is short on the black intakes as molding is expected to take place by Friday or next week at the latest. 1 Quote Link to comment Share on other sites More sharing options...
Xtra Posted January 7, 2021 Report Share Posted January 7, 2021 (edited) Great news.. If you have been following this thread then you know that I took a chance and invested to lower the price, and it worked out for everyone. All of the materilal has been allocated . Thanks to everyone for your support. Edited January 7, 2021 by Xtra 2 Quote Link to comment Share on other sites More sharing options...
Duece McCracken Posted January 7, 2021 Report Share Posted January 7, 2021 7 hours ago, Xtra said: Great news.. If you have been following this thread then you know that I took a chance and invested to lower the price, and it worked out for everyone. All of the materilal has been allocated . Thanks to everyone for your support. Thank you for making this happen. None of that was easy or quick by any means. It's much appreciated. So when are you making an ABS airbox/intake kit to go with this? Mine as well keep moving down the air path, lmfao!!! 2 Quote Link to comment Share on other sites More sharing options...
Xtra Posted January 7, 2021 Report Share Posted January 7, 2021 (edited) I would have to check with snmjim and Special-K on that as they are the designers of a custom air box, and that is their turf. I would not copy any little part of their design or idea unless I had their blessing. Yup you are correct Duece, My intake helps to feed the snorkel.a custom air box would complete a very nice system and the two parts would work together. Also changing the air box may not be street or smog legal. Speaking of that I would swap out my intake when going in for a smog check with the stock sight shield, just in case. Edited January 7, 2021 by Xtra 1 Quote Link to comment Share on other sites More sharing options...
Duece McCracken Posted January 7, 2021 Report Share Posted January 7, 2021 1 hour ago, Xtra said: I would have to check with snmjim and Special-K on that as they are the designers of a custom air box, and that is their turf. I would not copy any little part of their design or idea unless I had their blessing. Yup you are correct Duece, My intake helps to feed the snorkel.a custom air box would complete a very nice system and the two parts would work together. Also changing the air box may not be street or smog legal. Speaking of that I would swap out my intake when going in for a smog check with the stock sight shield, just in case. Oh yeah, forgot about their project. Thought it was just a one off, i need to revisit that thread. Luckily, I dont have to deal with smog, lol. Quote Link to comment Share on other sites More sharing options...
Xtra Posted January 8, 2021 Report Share Posted January 8, 2021 1 hour ago, Duece McCracken said: Oh yeah, forgot about their project. Thought it was just a one off, I have acquired the skills to make a part like that, but it is snmjim's intellectual property, and as I said, I won't touch it unless snmjin gives the ok. It would cost me a lot of time, money, and work to develop it into a legit item with the quality that people expect. 2 Quote Link to comment Share on other sites More sharing options...
Duece McCracken Posted January 8, 2021 Report Share Posted January 8, 2021 (edited) I'd support that joint venture, with cold, hard, cash. Maybe some ducats too. Edited January 8, 2021 by Duece McCracken 1 Quote Link to comment Share on other sites More sharing options...
CrackedDSM Posted January 9, 2021 Report Share Posted January 9, 2021 You can’t claim dibs on every form of custom airbox, so with all due respect to those two, they’d honestly either have to understand or just be mad. You’re not doin it on purpose. Plus they still haven’t released it for sale. Just make your own design, and don’t purposefully copy their stuff. I don’t see the problem. A bird in the hand, and all that. The joys of capitalism is if his product is better whenever it may be released, the market will gravitate there. Plus if you made it right you could market it to the fusion sport guys. Win win. 1 1 Quote Link to comment Share on other sites More sharing options...
Xtra Posted January 9, 2021 Report Share Posted January 9, 2021 (edited) Duece and Cracked thank you for your encouragement. Just got off the phone with snmjim and got his blessing to move forward with the project. ? I have done a little research and have to do a lot more before I can create a proper design. Right now I have to deal with getting all these orders filled and shipped and staying healthy Edited January 9, 2021 by Xtra 4 Quote Link to comment Share on other sites More sharing options...
omidsolo Posted January 9, 2021 Report Share Posted January 9, 2021 Man I love you nerds, salute from the other side of earth! 2 Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted January 10, 2021 Report Share Posted January 10, 2021 @Xtra i hope all is well with your health, and of course, your loved ones'! 1 1 Quote Link to comment Share on other sites More sharing options...
Xtra Posted January 10, 2021 Report Share Posted January 10, 2021 12 hours ago, WWWPerfA_ZN0W said: @Xtra i hope all is well with your health, and of course, your loved ones'! Thanks, I am fine, just not taking any chances . I have too much responsibility and don’t have time for COVID. 1 Quote Link to comment Share on other sites More sharing options...
Xtra Posted January 13, 2021 Report Share Posted January 13, 2021 Update: The black ABS intakes are scheduled to be molded today?. Hopefully I can pick them up on Thursday or Friday, and start working on them. The custom carbon material was scheduled to be manufactured this week. I have not been notified of it being shipped yet. 1 2 Quote Link to comment Share on other sites More sharing options...
Xtra Posted January 14, 2021 Report Share Posted January 14, 2021 I have lots of work to do .... 2 Quote Link to comment Share on other sites More sharing options...
Xtra Posted January 15, 2021 Report Share Posted January 15, 2021 (edited) Got a good start today . Have completed the rough trim on all of them, and hopefully can get a couple done this weekend. First ordered, first shipped. I believe that is the fair thing to do. Edited January 15, 2021 by Xtra 3 Quote Link to comment Share on other sites More sharing options...
handfiler Posted January 15, 2021 Report Share Posted January 15, 2021 Looking good. How's the mold holding out? 1 Quote Link to comment Share on other sites More sharing options...
dcmawyer Posted January 15, 2021 Report Share Posted January 15, 2021 I sent you a PM, Xtra. 1 Quote Link to comment Share on other sites More sharing options...
Xtra Posted January 15, 2021 Report Share Posted January 15, 2021 (edited) 18 hours ago, handfiler said: Looking good. How's the mold holding out? Thanks for asking. When I picked up the parts I had a chance to talk to the tech who works with the mold and runs the machine. He said the mold is working well and there are no problems or maintenance needed. So far, so good ? Edited January 15, 2021 by Xtra 3 Quote Link to comment Share on other sites More sharing options...
hollywood10s Posted January 17, 2021 Report Share Posted January 17, 2021 @Xtra Any more carbon fiber intakes available? Thaks. 1 Quote Link to comment Share on other sites More sharing options...
Xtra Posted January 17, 2021 Report Share Posted January 17, 2021 1 44 minutes ago, hollywood10s said: @Xtra Any more carbon fiber intakes available? Thaks. You bet, Check your PM, I sent you a message. 1 Quote Link to comment Share on other sites More sharing options...
ImLivingOnTheEdge Posted January 18, 2021 Report Share Posted January 18, 2021 Hey, I just found this thread! Is there any product left available? I'm okay with carbon fiber or not carbon fiber. Whatever you got, if anything. 1 Quote Link to comment Share on other sites More sharing options...
Xtra Posted January 18, 2021 Report Share Posted January 18, 2021 (edited) 23 minutes ago, ImLivingOnTheEdge said: Hey, I just found this thread! Is there any product left available? I'm okay with carbon fiber or not carbon fiber. Whatever you got, if anything. You bet, check your PM. Just a reminder the intake only fits 2015 to 2018 Edges. It does not fit the ST or 2019 and later. Edited January 18, 2021 by Xtra Quote Link to comment Share on other sites More sharing options...
ImLivingOnTheEdge Posted January 18, 2021 Report Share Posted January 18, 2021 OH 24 minutes ago, Xtra said: You bet, check your PM. Just a reminder the intake only fits 2015 to 2018 Edges. It does not fit the ST or 2019 and later. OH! I didn't catch that. I've got a 2019 ST. So, I guess cancel. 1 Quote Link to comment Share on other sites More sharing options...
ImLivingOnTheEdge Posted January 18, 2021 Report Share Posted January 18, 2021 I didn't read every post in this topic. But I read enough to know that you spent a lot of time designing this. Any chance you might make an ST version? 1 Quote Link to comment Share on other sites More sharing options...
Xtra Posted January 18, 2021 Report Share Posted January 18, 2021 (edited) Because of all the questions that I have been receiving, and the fact that this is a long thread, I feel I need to review some things. 1. The intake only fits 2015 to 2018 Edges. It does not fit the ST or 2019 and later Edges. 2. The carbon material is not solid carbon fiber. Solid carbon fiber is not thermoformable. Therefore, I found a composite material that would work with the mold. According to the manufacturer, It has a thermoplastic base layer with a thin carbon-fiber layer laminated to it, then a clear gloss protective layer laminated over the carbon fiber giving that great look, exactly as in the video and photos. 3. I have no control over the shipping cost, and I get individual quotes for each order. I do not mark up the shipping, but I do round it off to the closest dollar. I hope that answers some questions. If anyone has questions I will be happy to answer them. Edited January 18, 2021 by Xtra 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.