Petemon717 Posted November 20, 2017 Report Share Posted November 20, 2017 I think it may be blend door actuator. Any ideas of location and verifying its failure? 08 edge limited with dual climate control. Quote Link to comment Share on other sites More sharing options...
PaulSchott Posted November 20, 2017 Report Share Posted November 20, 2017 I can't see both actuator doors breaking at the same time. Does your temp gauge get up to normal temp? I have manual A/C-heat so I'm not that familiar with the system. You may need to reboot the system. Another member may be able to help you with the system. Quote Link to comment Share on other sites More sharing options...
Petemon717 Posted November 20, 2017 Author Report Share Posted November 20, 2017 I think it may be blend door actuator. Any ideas of location and verifying its failure? 08 edge limited with dual climate control. Quote Link to comment Share on other sites More sharing options...
Petemon717 Posted November 20, 2017 Author Report Share Posted November 20, 2017 Update. Bypassed blend door to full heat position and it gets warmer but still not hot and drivers side vent are even less heat than pass side... Im boggled. I may try a radiator flush next? Quote Link to comment Share on other sites More sharing options...
Petemon717 Posted November 20, 2017 Author Report Share Posted November 20, 2017 I can't see both actuator doors breaking at the same time. Does your temp gauge get up to normal temp? I have manual A/C-heat so I'm not that familiar with the system. You may need to reboot the system. Another member may be able to help you with the system. Quote Link to comment Share on other sites More sharing options...
Petemon717 Posted November 20, 2017 Author Report Share Posted November 20, 2017 My temp gauge is normal yes. Its stays in the same range it always has. The inside temp goes down when I turn the heat down, it just stops getting hot at a certain temp like 78 Quote Link to comment Share on other sites More sharing options...
Petemon717 Posted November 20, 2017 Author Report Share Posted November 20, 2017 My temp gauge is normal yes. Its stays in the same range it always has. The inside temp goes down when I turn the heat down, it just stops getting hot at a certain temp like 78 Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted November 20, 2017 Report Share Posted November 20, 2017 check to make sure the coolant level is at or slight above the cold fill range (above the seam) when the Edge is off, cold, and parked on level ground. Low coolant can do this. It may be a blocked heater core, but let's keep fingers crossed on that. How many miles on the Edge, and has the coolant ever been flushed? I think Ford calls for 105K for first change, then every 60K thereafter. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.