colorado Posted November 10, 2017 Report Share Posted November 10, 2017 ok, so i did change both my vct selenoid, reinstalled everything, change the oil and started the engine. engine running very rough at idle and got this code( P0018 camshaft position/camshaft correlation bank 2 sensor A)(same message but with P0018(pd) and P0021-P0021(pd) camshaft position timing over advance or system performance (bank2). did put a brand new camshaft sensor in front, r/h side.when for a drive, look like i got power and its running fine but when i came back in the garage, running rough at idle. also can hear some noise in engine that was not there before i change the vct solenoid. also check my solenoid by adding 12 volts power on it, they do works. also disconnected the battery the reset computer. no luck. am i missing something? thanks Quote Link to comment Share on other sites More sharing options...
macbwt Posted November 11, 2017 Report Share Posted November 11, 2017 Cam phasers may be causing this issue. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.