Viktor Breeden Posted September 27, 2017 Report Share Posted September 27, 2017 To access this menu Put key in don't start it Press setup and reset at the same time. While pressing the buttons start car Scroll with either info/setup/menu Here's a video through all the menus ***** To access the Nav Secret menu press 3&6 button together 3 Quote Link to comment Share on other sites More sharing options...
enigma-2 Posted September 27, 2017 Report Share Posted September 27, 2017 Good to know. In addition, you can run a test on the gen 1 EATC module by pressing the OFF and DEFROST buttons together, the within 2 seconds, press the AUTO button. The heat/cool display will show 4 bars indicating the test mode has been enetted and then any codes will be displayed. 88 88 indicates the test passed. When done, it's important to exit the test mode by pressing the DEFROST button or BLUE temp down button (others may work as well). 1 Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted September 27, 2017 Report Share Posted September 27, 2017 Good info! Maybe folks can keep adding to this thread as they find any "eggs" so all of these tips are in one place! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.