MrHappy Posted February 13, 2023 Report Share Posted February 13, 2023 Awesome, thank you everyone. I couldn't clearly tell what they were due to the rust but this gives me a good point to go from. Pretty sure they don't sell the nuts by themselves based on when the passenger side was replaced under warranty. (Same issue) The dealer had to order the entire replacement shield kit. (Seemed wasteful then too). Thanks again! Quote Link to comment Share on other sites More sharing options...
omar302 Posted February 13, 2023 Report Share Posted February 13, 2023 1 hour ago, MrHappy said: Pretty sure they don't sell the nuts by themselves based on when the passenger side was replaced under warranty. @1004ron posted a link to buy them from Amazon. Also, I was able to find it on TascaParts (link). 1 1 Quote Link to comment Share on other sites More sharing options...
MrHappy Posted February 13, 2023 Report Share Posted February 13, 2023 I saw the Amazon assorted kit but didn't find you're second link until you posted it, thank you!!! Quote Link to comment Share on other sites More sharing options...
Double George Posted March 25 Report Share Posted March 25 I have same issue on my2020 edge, however there are no plastic clips on my covers. There are only the stamped metal nuts along the edges. How can I eliminate the rattling? I thought about pool noodles slid between panels and bottom of car. Would this work? Quote Link to comment Share on other sites More sharing options...
1004ron Posted March 26 Report Share Posted March 26 12 hours ago, Double George said: I have same issue on my2020 edge, however there are no plastic clips on my covers. There are only the stamped metal nuts along the edges. How can I eliminate the rattling? I thought about pool noodles slid between panels and bottom of car. Would this work? They're recessed so unless you get right below them you might not see them - also possible that Ford made a change with your Model/Year - maybe @Haz can confirm. Quote Link to comment Share on other sites More sharing options...
Haz Posted March 26 Report Share Posted March 26 (edited) The following Underbody Shield images from the 2020 Edge Workshop Manual depict retainer types, quantities, and locations... 2.0L EcoBoost 2.7L EcoBoost PDF versions of these images are attached below... Underbody Shield Image #1 - 2.0 EcoBoost - 2020 Edge Workshop Manual.pdf Underbody Shield Image #2 - 2.0 EcoBoost - 2020 Edge Workshop Manual.pdf Underbody Shield Image #3 - 2.0 EcoBoost - 2020 Edge Workshop Manual.pdf Underbody Shield Image #4 - 2.0 EcoBoost - 2020 Edge Workshop Manual.pdf Underbody Shield Image #1 - 2.7 EcoBoost - 2020 Edge Workshop Manual.pdf Underbody Shield Image #2 - 2.7 EcoBoost - 2020 Edge Workshop Manual.pdf Underbody Shield Image #3 - 2.7 EcoBoost - 2020 Edge Workshop Manual.pdf Good luck! Edited March 26 by Haz 1 Quote Link to comment Share on other sites More sharing options...
bhamraS97 Posted March 26 Report Share Posted March 26 (edited) 15 hours ago, Double George said: I have same issue on my2020 edge, however there are no plastic clips on my covers. There are only the stamped metal nuts along the edges. How can I eliminate the rattling? I thought about pool noodles slid between panels and bottom of car. Would this work? Hey, as from pictures from @Haz, my 2018 Ford Edge has similar layout as 2.7L model. All I did was, removing the loose middle clips on the side panels on both driver and passenger side and keep the good ones. And for the good ones I added double sided tape inbetween clips and frame to act as cushion and that worked for me. Driven 160 once and no rattle at all. Hope this helps Edited March 26 by bhamraS97 Quote Link to comment Share on other sites More sharing options...
1004ron Posted March 26 Report Share Posted March 26 1 hour ago, bhamraS97 said: Hey, as from pictures from @Haz, my 2018 Ford Edge has similar layout as 2.7L model. All I did was, removing the loose middle clips on the side panels on both driver and passenger side and keep the good ones. And for the good ones I added double sided tape inbetween clips and frame to act as cushion and that worked for me. Driven 160 once and no rattle at all. Hope this helps And what 2018 model is that? Please add that to your profile signature - Settings - Ford Edge Forum Quote Link to comment Share on other sites More sharing options...
bhamraS97 Posted March 26 Report Share Posted March 26 10 minutes ago, 1004ron said: And what 2018 model is that? Please add that to your profile signature - Settings - Ford Edge Forum Done Added the signature, right now don't have access to laptop so will double check later but it's a 2018 Ford Edge 3.5L V6 Quote Link to comment Share on other sites More sharing options...
Dalton elsea Posted September 25 Report Share Posted September 25 Makes a strange noise almost like something is flapping around, looked under car nothing is loose, only makes the noise sometimes and only while driving IMG_5244.mov 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.