Brian1973 Posted March 20, 2017 Report Share Posted March 20, 2017 I found a crack in my right side ground effect and was wondering how do you remove them. I'm assuming there is some body molding tape. Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted March 20, 2017 Report Share Posted March 20, 2017 No tape apparently, there are 4 screws in all, and some tabs underneath that need to be unclipped. Remove the rocker panel moulding front cap. Remove the 2 screws. Remove the front cap. NOTE: RH shown, LH similar. Remove the 2 screws from the rocker panel moulding inside the rear wheelhouse. Open the front and rear doors. Release the retainers on the bottom of the rocker panel moulding. Pull outward to release the rocker panel moulding from the body, starting from the front of the vehicle moving rearward. To install, reverse the removal procedure. Quote Link to comment Share on other sites More sharing options...
Brian1973 Posted June 8, 2017 Author Report Share Posted June 8, 2017 How do I release the top. I took the 4 screws out and it feels like the top of the ground effect in the door jams are bolted on. I don't want to pull to hard. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.