mortndann Posted February 22, 2016 Report Share Posted February 22, 2016 Popped the hood and found that the safety catch would not move the hook to fully release the hood. The yellow release lever would move to the left and could also be pushed down but no release. Finally closed the hood and popped again and had the same results but then finally worked after several tries. Am I doing something wrong? Anyone have this problem? Thinking of dropping by a dealer to see if they have had a service bulletin etc. on this problem. Quote Link to comment Share on other sites More sharing options...
enigma-2 Posted February 23, 2016 Report Share Posted February 23, 2016 Kind of sounds like it's not moving all the way. Think I would start be spraying WP40 all around the latch area and operate it several times. Quote Link to comment Share on other sites More sharing options...
mortndann Posted March 6, 2016 Author Report Share Posted March 6, 2016 Thanks for your reply. Hood no problem since my post. Decided the hood release was stuck due to disuse. It was built in March 2015 and had been sitting in dealer stock and I doubt anyone ever popped the hood since the dealer did a factory delivery. Still sprayed on a little WD-40. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.