jcglfer Posted February 1, 2016 Report Share Posted February 1, 2016 I ordered my HID lights from drivebright.com and have loved the lights. I had issues for a month or so with the passenger light not starting, but that was fixed by taking lights off auto. Last week it wasn't working and I noticed corrosion in a connector. I tried contacting Dan with no luck so I ordered new lights and through that was able to get a response and it was covered under warranty. The new lights came and the bulb looks completely different and the connector is smaller and won't work. Any ideas on what to do next? It's frustrating. Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted February 2, 2016 Report Share Posted February 2, 2016 Try cleaning up the old connector (a wire brush should do it) and putting some dielectric grease in it prior to reconnecting. Hopefully that will restore enough flow and keep the gremlins out. These part mixups have happened once or twice before, puddle lights IIRC, just keep pestering him till he gets it right for you. Could be a redesign, but he needs to clarify that to you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.