edgetb Posted November 5, 2015 Report Share Posted November 5, 2015 (edited) I have a 2015 Edge SEL 3.5L engine with almost 5k miles. We have now experienced the dreaded stall. It only occurs after stopping or at low speeds such as when making a turn. Dropped it off today at our dealership, with which we have much good experience over several years. Service manager said they have been advised by Ford to do a PCM flash. He was hesitant to guarantee that the PCM flash would completely resolve this issue. For anyone else experiencing this issue, how has your dealer repaired it? Did the problem occur again after it was "fixed" by the dealer? UPDATE (Nov 15): Received my Edge back after a week. We had a few other warranty issues to be addressed while they were flashing the PCM. There are changes we have noticed since the PCM flash. No stalls--after one week Engine no longer "stumbles" when accelerating from a stop or when accelerating sharply at higher speeds Acceleration at all speeds is smoother and more responsive What we thought might be a transmission issue was in fact the "stumbling" mentioned above. Transmission is butter smooth at all shifts Gas mileage has dropped about 1mpg on our regular mixed city/highway driving This one is odd: We had not liked the brakes as they were SUPER sensitive. They are much improved after picking it up from the dealership. I forgot to mention this issue when I left it at the dealership, so I do not know if the PCM flash improved them or if the dealership noticed it when test driving and adjusted them. Either way, we are very pleased with them now Overall, I am pleased with the work done by the dealer and am optimistic the PCM flash has resolved our stalling/loss of power issues. Edited November 17, 2015 by edgetb Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted November 5, 2015 Report Share Posted November 5, 2015 (edited) Need to have the PCM calibration updated. There's a TSB 15-0123 on it in another thread. The only fix we are aware of to date. I'm sure you've seen this thread already: http://www.fordedgeforum.com/topic/18716-2015-edge-sport-engine-shut-down-while-driving/ Edited November 5, 2015 by WWWPerfA_ZN0W 1 Link to comment Share on other sites More sharing options...
foxxyfox Posted November 8, 2015 Report Share Posted November 8, 2015 I also have the 3.5 and had that happen to me. After the calibration update it's been fine. I've put in about 1,500 miles since the update and it seems to have solved the problem. Link to comment Share on other sites More sharing options...
edgetb Posted November 8, 2015 Author Report Share Posted November 8, 2015 Need to have the PCM calibration updated. There's a TSB 15-0123 on it in another thread. The only fix we are aware of to date. I'm sure you've seen this thread already: http://www.fordedgeforum.com/topic/18716-2015-edge-sport-engine-shut-down-while-driving/ Thanks, WWWPerfA.Znow. This is what the dealership is doing. Link to comment Share on other sites More sharing options...
edmonton.guy Posted November 8, 2015 Report Share Posted November 8, 2015 Is this issue with all the 3.5 l engines? I have only about 700 KM's on my 2015 Edge. I dont know if the PCM has been flashed or not. Link to comment Share on other sites More sharing options...
POWERSTROKE Posted November 8, 2015 Report Share Posted November 8, 2015 Never had a single hesitation or stall with our 3.5L '15 Edge. 11,500 miles so far. Link to comment Share on other sites More sharing options...
Recommended Posts