EDST777 Posted August 11, 2015 Report Share Posted August 11, 2015 (edited) Guys, how to lubricate the fan under the filter of salon. At a low temperature (on a frost) it whistles so far the salon won't get warm. Any thoughts. Thanks.Ford EDGE 2008 Limited. Edited August 11, 2015 by EDST777 Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted August 11, 2015 Report Share Posted August 11, 2015 Sounds like you need a blower motor resistor OR a new motor entirely. I don't think you can lubricate the bearings on the motor, they are all sealed nowadays. 1 Quote Link to comment Share on other sites More sharing options...
EDST777 Posted August 12, 2015 Author Report Share Posted August 12, 2015 Sounds like you need a blower motor resistor OR a new motor entirely. I don't think you can lubricate the bearings on the motor, they are all sealed nowadays. Nevertheless I would like to make it, whether there is no procedure of analysis at someone for this place? Thanks. Quote Link to comment Share on other sites More sharing options...
Redbow Posted August 12, 2015 Report Share Posted August 12, 2015 You can sometimes drill a small hole at the front and rear bearings. Lub them with some fine oil and the put a drop of epoxye to keep the lub in. Burke 1 Quote Link to comment Share on other sites More sharing options...
EDST777 Posted August 12, 2015 Author Report Share Posted August 12, 2015 Thanks! Quote Link to comment Share on other sites More sharing options...
enigma-2 Posted August 28, 2015 Report Share Posted August 28, 2015 Seen where they're going for a little over $40 on ebay. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.