Gilad Evron Posted July 31, 2015 Report Share Posted July 31, 2015 Hi guys, New problem in my 2011 edge: after using the high beams, i can't turn them off! even after turning off the engine, the high lights are still on, you can see the blue light sigh on, the handle is use less...so i pull off the Plus plug in my battery and reset the system- now everything is fine but after lighting again the high beam..its stuck again... what can i do? familiar with that problem? thanks Gilad Quote Link to comment Share on other sites More sharing options...
akirby Posted July 31, 2015 Report Share Posted July 31, 2015 Could be the stalk itself or the smart junction box. Quote Link to comment Share on other sites More sharing options...
Gilad Evron Posted August 1, 2015 Author Report Share Posted August 1, 2015 Could be the stalk itself or the smart junction box. thanks mate, what should i do now? can i check this SJB by myself? some reset that i can do ? Quote Link to comment Share on other sites More sharing options...
akirby Posted August 1, 2015 Report Share Posted August 1, 2015 Not a DIY thing unfortunately. Probably need to see the dealer. 1 Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted August 1, 2015 Report Share Posted August 1, 2015 The "easiest" parts to throw at the problem are the headlamp switch and the multifunction switch. The SJB, as akirby pointed out, is best left to the dealer/service shop to diagnose. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.