jrSS Posted July 9, 2015 Report Share Posted July 9, 2015 I just wanna know if anyone has cut half a loop off their h&r springs to bring the stance down another 1/2" or so. And if I do decide to do this will the camber kit still get me to factory spec alignment wise? I know cutting springs is normally a no no but half a loop couldn't do much if any harm. The lowering springs from h&r do look good I just wanna close the gap to the fender well a little more. I have always lowered my vehicles but many vendors offered more lowering kits for other vehicles. Seems to be only one for the edge. And yes I know about taking the insulators out for the front to bring it down a little more. Quote Link to comment Share on other sites More sharing options...
jrSS Posted July 9, 2015 Author Report Share Posted July 9, 2015 As I looked and googled lowered ford edges I don't think I wanna hack up my springs. Dunno wtf I was thinking. :duh: Quote Link to comment Share on other sites More sharing options...
RustyEdge Posted July 9, 2015 Report Share Posted July 9, 2015 Glad you came to that realization on your own haha.... Quote Link to comment Share on other sites More sharing options...
jrSS Posted July 9, 2015 Author Report Share Posted July 9, 2015 Lol. Quote Link to comment Share on other sites More sharing options...
66on22s Posted September 6, 2015 Report Share Posted September 6, 2015 What did you find in your Google searching that made you change your mind? Quote Link to comment Share on other sites More sharing options...
jrSS Posted September 15, 2015 Author Report Share Posted September 15, 2015 Alignment probably wouldn't beable to be achieved if I cut any of the coil. Plus the ride has already suffered when lowering. I knew the ride wouldn't ride like oem before I lowered it. Quote Link to comment Share on other sites More sharing options...
Edged Up Posted November 1, 2015 Report Share Posted November 1, 2015 Too rough? Quote Link to comment Share on other sites More sharing options...
Landyn Posted April 26, 2017 Report Share Posted April 26, 2017 I have a 2011 ford edge sport. I just installed h&r lowerings springs which are 1.75 front and 1.5 rear. Will i need an alignment? And if there is something else i need id like to know. Quote Link to comment Share on other sites More sharing options...
Nick Halstead Posted April 26, 2017 Report Share Posted April 26, 2017 I have a 2011 ford edge sport. I just installed h&r lowerings springs which are 1.75 front and 1.5 rear. Will i need an alignment? And if there is something else i need id like to know. yes after about 100-200 miles get your alignment done. Wont need anything else Quote Link to comment Share on other sites More sharing options...
Landyn Posted April 26, 2017 Report Share Posted April 26, 2017 Perfect thanks Quote Link to comment Share on other sites More sharing options...
Redwood Posted May 8, 2017 Report Share Posted May 8, 2017 I have a 2011 ford edge sport. I just installed h&r lowerings springs which are 1.75 front and 1.5 rear. Will i need an alignment? And if there is something else i need id like to know. I'm curious, are you still running the factory shocks / struts? If so, how is the ride with the H&R springs? Quote Link to comment Share on other sites More sharing options...
Landyn Posted May 8, 2017 Report Share Posted May 8, 2017 Yes i am still and i love the ride. It may be a little bit more stiff but id say hardly even noticable. Handling is way better to id say. No complaints at all. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.