Mtbikr17 Posted March 28, 2015 Report Share Posted March 28, 2015 Hello everyone, I recently bought my first edge (SE AWD) and was looking to add a factory remote start kit and had some questions about the install process. From what I have read, the kit is a simple plug and play. It only has the antenna module with one wire, along with 2 blank keys. My questions are: 1. Where does it get plugged into and where to mount the antenna module? 2. Can I program the keys to the cars computer myself? 3. Does that leave only needing the dealer to active the remote start feature in the vehicles computer? The kit I would order along with a needed hood switch part numbers I have listed below. Thanks for any and all help that you all can give! Remote start kit: BC3Z_19G364_A Hood Switch: BT4Z_19G366_A -Tim Quote Link to comment Share on other sites More sharing options...
candurin Posted March 28, 2015 Report Share Posted March 28, 2015 http://www.fordedgeforum.com/topic/17035-adding-oem-remote-start-kits-parts-explained-detailed-2011/# Quote Link to comment Share on other sites More sharing options...
GNERGY Posted April 7, 2015 Report Share Posted April 7, 2015 I also ordered the wiring harness for the hood switch, cause I looked around under the hood and couldn't find any wires. Hood switch wiring harness DG1Z14B504A Less than $20.00 I ordered all my parts from ( alarm, remote start, hood switch and wiring harness ) Geiser Ford 1-309-923-2141 Ask for Mike, in parts dept. he beat all the other prices I could find and has free shipping too. Tell him I sent you Tarey Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.