Hawker Posted November 16, 2007 Report Share Posted November 16, 2007 Just got my Edge back after having a new engine installed at 1,500 miles. Have noticed that if I stop on my slightly inclined driveway that the vehicle will roll back, all the way to the street if I let it. Is there maybe a low fluid level here from the major rebuild that just took place?? Or a computer chip issue perhaps. Quote Link to comment Share on other sites More sharing options...
07 MKX Posted November 16, 2007 Report Share Posted November 16, 2007 There is at least one if not 2 other threads on this.. Use the search function. You could say more info in your post when you write about it. I have to assume, you are in Neutral and not putting your foot on the brake, by the way you wrote about this. Quote Link to comment Share on other sites More sharing options...
Grey Posted November 16, 2007 Report Share Posted November 16, 2007 Virtually all vehicles with an automatic transmission will do this to some degree. Our vehicles just do it on a slightly lower slope than some others. Use the brakes. Quote Link to comment Share on other sites More sharing options...
Pete K Posted December 2, 2007 Report Share Posted December 2, 2007 Sounds normal to me. Quote Link to comment Share on other sites More sharing options...
CreamEDGE. Posted December 2, 2007 Report Share Posted December 2, 2007 Yeah, it's normal for the EDGE, but the CX-7, or 9 for that matter, don't do it as much as the EDGE, only on the steepest of inclines. Quote Link to comment Share on other sites More sharing options...
akirby Posted December 2, 2007 Report Share Posted December 2, 2007 Yeah, it's normal for the EDGE, but the CX-7, or 9 for that matter, don't do it as much as the EDGE, only on the steepest of inclines. It's a function of the engine idle speed and torque converter stall speed. Quote Link to comment Share on other sites More sharing options...
CreamEDGE. Posted December 2, 2007 Report Share Posted December 2, 2007 (edited) It's a function of the engine idle speed and torque converter stall speed. I understand, but it needs to be recalibrated so it doesn't do it so easily. Edited December 2, 2007 by CreamEDGE. Quote Link to comment Share on other sites More sharing options...
akirby Posted December 2, 2007 Report Share Posted December 2, 2007 I understand, but it needs to be recalibrated so it doesn't do it so easily. It was done on purpose for fuel economy. The drivetrain engineers didn't like it but weren't given a choice. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.