misterfixit Posted January 5, 2014 Report Share Posted January 5, 2014 When working under your edge where is the best place to position jack stands? Quote Link to comment Share on other sites More sharing options...
Tacyon Posted January 5, 2014 Report Share Posted January 5, 2014 between the frame and the ground .. sry couldn't resist. http://www.fordedgeforum.com/topic/8268-floor-jack-point-locations-on-a-2012-edge/ http://lmgtfy.com/?q=jack+stand+ford+edge sry still couldn't resist. 1 Quote Link to comment Share on other sites More sharing options...
misterfixit Posted January 5, 2014 Author Report Share Posted January 5, 2014 Been there - done that. I know the recommended lift points- just can't find a good place under the edge to place jack stands. Quote Link to comment Share on other sites More sharing options...
wlepse Posted January 5, 2014 Report Share Posted January 5, 2014 At least on my 2011 the front and rear jack points are marked on the side sills with arrows then there are a few notches in the sill so the jack stands can fit right in. Quote Link to comment Share on other sites More sharing options...
akirby Posted January 6, 2014 Report Share Posted January 6, 2014 The problem is the stands need to go very close to where the jack has to go. Just move the jack a little so you have room next to it for the stands. 1 Quote Link to comment Share on other sites More sharing options...
HackerF15E Posted August 1, 2020 Report Share Posted August 1, 2020 On 1/5/2014 at 5:33 PM, akirby said: Just move the jack a little so you have room next to it for the stands. How's that supposed to work? If you put the jack on the jack point, the stand is a good 6 inches away from the actual jack point. If you try and jack at a point away from the arrow, you end up bending the pinch weld seam. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.