Edge-thusiast Posted December 21, 2013 Report Share Posted December 21, 2013 After asking and being assured that the new '13 Edge could have decemt Ford flaps installed, we found that they not only didn't fit (not on the front, at least) but that the Ford version was what I'd call a "J. C. Whitney" solution -- i.e., cheap and poorly made. So we went with the Husky version from the bedliner people (http://www.huskyliners.com/images/ePIM/original/753933584115_P04.jpg). They were contoured, looked darned good and fit like a glove for about $40 front (we used the Ford junk on the back because there's already a fair-to-middlin' guard in the body moulding already there). The lesser-quality Ford version adds some extra protection on the back and looks OK, too, but I'd opt for the Husky on the rear if I hadn't already committed... J. in CO Quote Link to comment Share on other sites More sharing options...
OverHeight Posted December 24, 2013 Report Share Posted December 24, 2013 A few pics of them on your car would be nice. Quote Link to comment Share on other sites More sharing options...
Edge-thusiast Posted December 25, 2013 Author Report Share Posted December 25, 2013 (edited) OK, how's this...? All of the above are pre-drilled and attach with existing screws...which I'm not so sure is good for those rear Ford flaps since there's nothing holding them except along the left outside edges. That could be bad if one backs up into boilerplate snow, for example. The front Husky flaps don't have extra support either but they're a bit more robust. J. in CO Edited December 25, 2013 by Edge-thusiast 1 Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted December 25, 2013 Report Share Posted December 25, 2013 Let us know how these work out for you in the long run, J. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.